Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Chess Board--Tom Rex

Posts

Chess Board--Tom Rex

#1

Chess Board--Tom Rex

George@Colonel's Workshop-Havertown PA

>

Re: Chess Board--Tom Rex

#2

Re: Its not working

George@Colonel's Workshop-Havertown PA

>Sorry Tom,

The graphic is too large to post and I can't figure out how to shrink it. Maybe later.

George

Re: Chess Board--Tom Rex

#3

Colonel

Dan Donaldson

>Send it to me and I will fix it for you.

Re: Chess Board--Tom Rex

#4

Re: Ah Ha--Check Mate!

George@Colonel's Workshop-Havertown PA

>Good Evening Tom,

Here is the picture you asked for. Walnut and maple grid, banded by a strip of honduras mahogony. Squares are 1 5/8". The inner perimeter is quilted maple, 1 1/2" wide. Edge banding is 1/2 inch wide QS sycamore, dyed red/brown mahogany, and chamfered 60 degrees. It covers a piece of 3/4" birch plywood. I used minwax "tung oil". Two coats so far, and I will apply at least one more. I now have orders for two more, which I will begin tomorrow.

I also will turn the chess pieces on my lathe, but have a bit of experimenting to do first. The pieces will be contained in a two drawered box, with the chess board being the top.

George


img

Re: Chess Board--Tom Rex

#5

Re: Ah Ha--Check Mate!

Tom Rex in TX

>Beautiful!!

Hope mine comes out that good.

Re: Chess Board--Tom Rex

#6

Re: Ah Ha--Check Mate!

Roy C. Gryder

>You done good!!