Weird Finishing Experience Last Night
Tony - Memphis
>I am finishing a cherry mantel clock I made for some friends for Christmas (yeah, I'm running late). For my taste, I normally don't stain cherry. But they like A&C style stuff and all their furniture is dark oak. So, I thought I'd glaze the cherry a bit just to get it a little more brown and a little darker. I have read a couple of articles on finishing cherry recently that showed some pretty good techniques. So I started with a coat of Sealcoat thinned 50%. After that, I hit it with Bartley's brown mahogany gel stain. I liked the color pretty good, but I had found a good combination on my test board by adding a coat of homemade glaze using gel poly and Trans Tint stains (some amber and some med brown). When I first started wiping that on last night (the second glaze - first glaze was good and dry from night before), it looked really nice. Just what I was looking for...until....these splotches just all the sudden appeared! I couldn't figure out what was happening, but I had these big light splotches everywhere - like the wood had hives! So, I was panicking! I ended up scrubbing the wood with mineral spirits and a gray pad. that seemed to even things out. Well, while I was rubbing I noticed a spot under where I was holding the wood. The only thing I can come up with was that the gloves or the powder on the gloves (which I thought I had wiped off) reacted with the glaze. Maybe it was the trans tint solvent? I've done this many times and never experienced this, but these are new gloves. They are the latex type from Home Depot I think. Can't recall the brand but I think it started with an F (finish something?). Anyway, I did the rest of the clock without gloves and didn't have any issues. So, those gloves are going to the garage for other work. I didn't like them from the start anyway because they had so much powder on them. I noticed when I was finishing my last project that they left dust on the finish.
Anyway, just thought I'd share the nightmare in case anybody else had a similar experience and as a warning. I just grabbed these gloves and didn't even think. I really prefer the vinyl gloves, but I wasn't thinking when I picked these up. I normally have a box of each on hand for whatever task comes along.
I think I got the glaze looking decent. We'll see tonight when I get home. I'll probably seal what I have in and maybe hit it with another coat to even things out and adjust the color. Neat little clock. I'm pleased with the design. My design, but heavily inspired by clocks at Schlabaugh & Sons sight. I bought a tile from Motawi tile. I'm not into A&C, but it has been a fun project. Now if I can just finish it!
Here is a construction pic...the top isn't finished (one more bevel to cut) and the clock dial is just a quickie I designed and printed for fitting and such. The clock has a pendulum that is visible via the arch on the bottom. I was able to get the swing height just right so you could see it. The tile is real nice and has a dragon fly on it.
My goodness I'm rambly this morning! Sorry!
Tony



