Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Bar Clamp Storage solutions

Posts

Bar Clamp Storage solutions

#1

Bar Clamp Storage solutions

mamc

>Does anyone have any interesting links or photos for Bar clamp storage? I am looking for an alternative way to store bar clamps in a realitively small shop, without having to dedicate 4 feet of wall space or constantly compete with another "thing" on wheels.

Re: Bar Clamp Storage solutions

#2

Re: Bar Clamp Storage solutions

Jerry Gibbs

>I clamp mine horizontally under upper cabinets. They have to be tightened and loosened each time, but they do not take up wall space. My shop is too cluttered to have a roll-around. Jerry Gibbs

Re: Bar Clamp Storage solutions

#3

Re: Bar Clamp Storage solutions

J. Roberts

>Just place horzional a 2X4 and put the bar clamp handle behind it so the bar is in front. No muss, no fuss.

Re: Bar Clamp Storage solutions

#4

Re: Bar Clamp Storage solutions

pecker

>Most of mine hang from a steel pipe that is mounted horizontally. Whoever plumbed our heating system 80 years ago put the pipe in a convenient place.

Re: Bar Clamp Storage solutions

#5

JL

Re: Bar Clamp Storage solutions

JL

>I have two methods. A long while back, we bought one of the plastic storage shelves for our garage. I ended up inheriting it for the shop when we moved. I clamp the clamps to the side of the top shelf. They make an interesting shelf side. For the smaller bar clamps, they on a couple of crossbars between the uprights of my work bench.

Re: Bar Clamp Storage solutions

#6

Re: Bar Clamp Storage solutions

George@Colonel's Workshop-Havertown PA

>Good Afternoon Mamc,

I built an A frame rack for most of the clamps. I had a difficult time moving it out so as to retrieve clamps from its rear sides. I reverted to "donated" wall space in the laundry, and that works well for both SWMBO and me. I improved the situation somewhat by storing most of my 6 and 8 foot bar clamps at my #3 son's shop. As a contractor, he has more of a need for them than I do, yet they are still available as necessary. Wall space is my best solutuion overall.

George

Re: Bar Clamp Storage solutions

#7

Re: Bar Clamp Storage solutions

Grant in Iowa

>For smaller bar clamps in my shop, they hang on the end of a workbench from a horizontally mounted 2x4. This is dead space anyway in my shop.

For the longer ones (actually my bessey 50" collection), they are hanging on a notched 2x4 behind my cyclone. This requires me to reach behind to retrieve most of them, but as the need is occasional to use them all, it is a good tradeoff.

I have two each 10' long 3/4" pipe clamps, which reside atop a concrete ledge in the general storage area of my shop.

One related habit I am in is to occasionally browse the "Shop Tours" photos on this site to plagiarize good storage ideas.

"Any mess expands to overfill the available space"

Regards,

Grant in Iowa

Re: Bar Clamp Storage solutions

#8

Re: Bar Clamp Storage solutions

AZ, Colorado Springs

>I have some inexpensive metal shelves in my work shop, about 6' tall. I screwed 2x2s along the top of each side, and the clamps hang from those 2x2s. About 3 linear feet of room for clamps. It's out of the way, and still very close at hand.

Re: Bar Clamp Storage solutions

#9

Re: Bar Clamp Storage solutions

del schisler

>you can put some 2x4's up on the celling some how and clamp them up their long way Make a drop down frame some how I clamp mine on the 2x4's that hold my shelves up kind of hard to explan how to do it

Re: Bar Clamp Storage solutions

#10

Re: Bar Clamp Storage solutions

Dave Bair, Eaton Rapids, MI

>If the door to your shop opens into the shop, use the wall space on the hinge side of the door. You'll not be putting anything else in that space, anyway. I drilled holes in the ends of my clamps and hung them 3-deep an 3-inch screws.

Re: Bar Clamp Storage solutions

#11

Re: Bar Clamp Storage solutions

mamc

>thanks seems wall space is hard to aviod. I do have a small hinge side of the door wall though where I might be able to work something out.

Thanks

Re: Bar Clamp Storage solutions

#12

Re: Bar Clamp Storage solutions

Jerry Gibbs

>A large diameter pvc pipe on end and with base will hold fair number of clamps with heads sticking up.

Re: Bar Clamp Storage solutions

#13

Re: Bar Clamp Storage solutions

Jim Dillon

>Sorry for the long delay in responding to your post with a picture of my clamp rack. Got this idea from the workshop book by Scott Landis maybe 15 years ago. It is made from 2x4s and is roughly 24 x 28 x 60 inches. It is on wheels, but I don't move it much. One could easily add an extra width of 2x4 to the outriggers to double the capacity, in addition to using the interior 2x4s for additional clamps. I throw my 6-12 inch Bessy Tradesman clamps into a 5 gallon bucket and that seems to work fine. As it is against the wall, it is difficult to conveniently get to the backside, but given the number of clamps I have, that has not been a problem as I keep some of my less used clamps there.

Again, I apologize for the delay. My heart was in the right spot, but execution was sorely lacking 8-). Anyway, maybe this will help others, so I decided to post.

Jim


img

Re: Bar Clamp Storage solutions

#14

Ellis Walentine

Re: Bar Clamp Storage solutions

Ellis Walentine

>I'm envious, Jim. I had forgotten about Scott's clamp rack. In the ten years since I rebuilt my shop, I have yet to build a decent clamp rack, and it's almost embarrassing. Luckily or unluckily, I don't have nearly as many clamps as I used to have, and they're all mix and match. A buddy, trying to be kind, gave me a roll-around rack on teeny little rollers that hardly work at all, and the arrangement of the structure doesn't lend itself to my oddball clamp selection. Yours looks really good to me.

Thanks for the reminder. Maybe I'll put a new clamp rack on my wish list for the spring.

Ellis

Re: Bar Clamp Storage solutions

#15

Re: Bar Clamp Storage solutions

Jim Dillon

>Good morning Ellis,

Thanks for your comments. Scott's book was a godsend for me when I was starting to set up my shop and looking for ideas (as was AW mag). While kind of hard to see in the photo, I departed from the original in a couple of ways. The bottom is actually a torsion box with 2x4s for internal bracing. I also added 2x4 bottom bracing front and back for the uprights; the ends were angled. A couple of 2x4s on edge at the bottom also brace the uprights. I used 3 inch wheels. It is surprisingly sturdy and resists racking quite well. Frankly, I don't move it much except to "clean", or remove the occasional dead mouse 8-). It moves in a straight line fairly easily, but trying to turn it is tough.

Jim

Re: Bar Clamp Storage solutions

#16

Re: Bar Clamp Storage solutions

mamc

>Thanks Jim looks great for a roll around.

Fairly compact compared to the usual mobile monster racks.

I am afraid i will end up having to resort back to the wall space design, as it seems like the best option and a necessary evil for me.

Thanks for the pic

Mark