We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>with the exception of lag bolts to connect the base to the top, or to connect a vise to the top, is there any reason to use lags or bolts on a workbench instead of glue? I'm only talking about the base (legs, stretchers, rails, feet).
I like glue (Titebond II or III) and prefer to not have metal someplace where glue will do as good or better job. Is there a reason that I should use bolts to join pieces together? I'm not planning on moving this bench.
>On mine, since I don't plan on disassembling the bench, I glued and wedge-tenoned (is that a word?) the legs and stretchers. The top is attached with bolts only because it may be removed at some point for flattening.
Bolts in legs and stretchers have a tendency to work loose with use; a wedged tenon will only come apart with a sledge hammer!
>My workbench is bolted together with carriage bolts and log bolts used on the top. I built this bench about 35 years ago and I can't recall ever having to tighten the bolts after initial assembly except when I dissembled it for a move.
>I built a similar bench about 35+ years ago. The end trestles are glued up, but are connected to the rails with bolts with nuts, not lag bolts. The bench top is located on the base with a couple of 1" dowels. Because of its weight, probably 200+ pounds, there was no need to glue, screw or lag bolt the top to the trestle base. My bench has served me well for over 35 years. I rest my case.