We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>A device that plugs into wall socket....maybe a inch thick...with normal plug in's on the outside and an on/off switch on the side.... or two switches, one for top and one for the bottom.
Instead of constantly having to unplug stuff, you could just flip a switch on the side of the adaptor for whichever appliance you wished to shut off completely.
>A few of the provincial power utilities here in the Great White North have estimated that UP TO 10% of total electricity usage is "ghost usage". That's a far cry from a 50% savings.
>I plugged my Cell phone charger into the gadget. Even with it in the 10X side there was no measurable usage. This charger does not have a light on it and does not appear to use any current when the phone is not plugged in. With the Phone charging it appeared to use .05 amps or about 6 watts. If it took two hours to charge the phone it take 12 watts. So, if a KW costs $.10, charging you phone would cost About 1 cent. With the phone plugged in but not charging the lights in the screen did not draw enough power to register.
My micro wave display did not draw enough power to register.
I did not try my TV because if I unplug it I have to go through the ordeal of reprogramming it. Same with my computer.
Just saw a This Old House segment on lighting. Halogen bulbs are not efficient, but produce very warm light. CFLs don't produce warm(colored) light but are significantly more efficient than old style incandescent bulbs and should last several times longer. LED bulbs don't produce the warm light either but are even more efficient that the CFLs and are supposed to last 20 years. They were talking $80 to 120 a bulb. A stunning amount of money but they are supposed to pay it back in two to three years. The rest of you should buy a lot of them so the price will come down and then I'll jump in. I already have CFLs. I write the date on many of them when I install them. Some last a year and some much longer. I don't think they are as good as they are cracked up to be.
>I'm inclined to agree with you, Grant. The largest usage we have that way is almost certainly the computer. The next is probably lights left on. Where we do notice usage is from the shop. I have never redone the table saw - it's still 110 - and it is used more than any other tool.
>Robert you are not going to reduce power usage by changing the saw from 110 to 220v. The current will be cut in half on 220 but since the voltage is 2x the 110 the power will remain the same and hence the cost to operate the saw will be the same.
>Ooops! I was close. It's a Kill A Watt meter, not Kill O Watt. Here's a place that describes and sells them. I have no connection to this site and haven't tried their products yet, but may get one of these to play with...looks like it would give you some solid info. on your particular site, which is the only way to really tell what you could save.
>One thing that is already on the market are "smart" power strips. One outlet is always live, the remainder are active when the item plugged into the main outlet is on. For example, it could be set up so that your computer is in the live outlet. When it's turned on, the printer, speakers, monitor, come on. Otherwise, they aren't drawing any power through their transformers or power save modes.
>Our local Ace Hardware had a small LED light display. They did have an LED bulb that put out a yellowish light rather than the bluish light typical of LED's like those found in flashlights. I suspect LED's are ultimately the future of lighting. No mercury and nearly permanant, or so they say.