Knockdown desk/table
Clint Searl
>This is a desk/table I put together a while back from various scraps and mechanical fasteners. The end panels are cut with shoulders like a side-to-side tenon that the feet and top rail are bolted into. The stretcher loose-fits into shallow mortices at either end. The base is pulled together rigidly by the crisscross cables and turnbuckles. The 38x71 top is a pair of solid core veneered commercial doors that are cut down and rejoined in the center and finished with glued breadboard ends. The whole thing can be knocked down into a flat pack.
Clint



