blowing off some steam
jan derr
>Of course in this downturned economy a furniture maker should not complain at all about having work. We know the dining table going out the door for 5k should have fetched 7k and the three drawer desk should have fetched another 1.5, but the cash flow is there keeping the business running and that's good.
All that said to say this: I promised I would never build another chair for less than $1200 and this set of 10 (8 sides and 2 arms) goes out for 9k. That's $850 for the sides and $1100 for the arms, meaning never say never. It's also 248 mortise and tennon joints with 80 of those being compound angle joints to allow for the seat splay, and those will enflame the brain; at least its burning mine trying to keep up with the mirror image parts. Then there's the ebony inlay in the splats because the architect said my design lacked orignality. This was quite easy to produce on the drafting table, but we all know the router doesn't leave a square end so that's 120 1/4" round ends to square with a chisel. Andy Rae loves that part, but where's he when the time comes. And as always there's the detailing, sanding, and finishing.
So I guess the bottom line is; will the $9000 suffice? Of course it will. Should I have backed off my promise? NEVER!



