Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Disk sander plate - query...

Posts

Disk sander plate - query...

#1

Disk sander plate - query...

John Aniano in NJ...

>Hello All,

I'd like to purchase a 6 or 8 inch diameter disk sanding plate that flush-mounts to the end of a 1/2" diameter shaft. Aluminum or steel construction, I really don't care. Could be a replacement part. Any ideas or part numbers?

TIA,

John

Re: Disk sander plate - query...

#2

Re: Disk sander plate - query...

lewisdodd

>Try WWGrainger

lewis

Re: Disk sander plate - query...

#3

Delta, Jet, Grizzley

Mark Goodall - ATL - tooljunkie

>You can buy replacement disks directly from Delta, Jet, Grizzley, etc from their spare parts department.

You need to know the sander model number (easy to find) and then the part nubmer for the alumiunm or steel disk (for that you'll need a parts manual, you can find most online).

I don't have the part numbers handy, but I've bought several of them over the years... usually 6" or 8" or 12". I actually have a couple of spares but I suspect that after you factor in the shipping cost, you'll be better or getting it direct.

Oh, and I've also bought a couple on eBay.

Given that I've bought several (aluminum and steel) and built disk sanders with them, you can also make a decent disk sander with a piece of MDF mounted to a plate.

Happy Woodworking!