Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Dust buildup in Dewalt DW735 planer

Posts

Dust buildup in Dewalt DW735 planer

#1

Dust buildup in Dewalt DW735 planer

Dale Critchlow

>Dust builds up in my Dewalt DW735 planer. I have to clean it out after about 30 minutes. I took off the hood over the blades and cleaned it thoroughly, but it didn't help. I suspect that the hood is warped.

Suggestions?

Thanks,

Dale

Re: Dust buildup in Dewalt DW735 planer

#2

Re: Dust buildup in Dewalt DW735 planer

Ed Mulligan, Cape Cod MA

>Sounds like you need more powerful dust collection. What's your current dust collection setup, and what are you planing?

Re: Dust buildup in Dewalt DW735 planer

#3

JL

Re: Dust buildup in Dewalt DW735 planer

JL

>A bit more information would be helpful.

I have a DW735. I've got the twist/lock adapter which goes into the planer (2 1/2" to 4"). I've got a short length of 4" hose which ends in a 4" quick connect. I hook the quick connect to my 4" blast gate on my DC system (2 hp cyclone). Before I got my cyclone, I had a 1 1/2 hp double bag system. Thus far the only problems I've had are when I don't empty the barrel often enough.

The DW735 can normally eject chips reasonably well by itself - though I wouldn't try it with a shop vacuum (it won't hold enough).

If the hood is warped, you will usually see it. Check for obstructions. See if the chip ejector fan is functioning properly.


img

Re: Dust buildup in Dewalt DW735 planer

#4

Re: Dust buildup in Dewalt DW735 planer

Kit Gage

>Something has to be wrong inside the machine. Mine blows chips thru 7' of 2.5 in hose out a window and then several feet beyond that. Must be the chip ejector/fan is broken or plugged!

Re: Dust buildup in Dewalt DW735 planer

#5

Man After my own heart....

Barry Irby

>You blow your shavings out the window? I love it. What I want to do is have my dust collector blow everything out into the woods. It's too far and I live in a subdivision, so I doubt the neighbors would like it. No more bags to empty and no worry about the microns of the filter.

Re: Dust buildup in Dewalt DW735 planer

#6

Re: Dust buildup in Dewalt DW735 planer

Tony - Memphis

>Mine too. I've left the hose off by mistake and it looked like it had snowed in the shop! I've been amazed at how far that thing blows. Still having my other issues with it, but I've never had an issue with the dust colection. Now, the cover over the blades broke, but I epoxied it back together and it is still kicking.

Tony

Re: Dust buildup in Dewalt DW735 planer

#7

Re: Dust buildup in Dewalt DW735 planer

Dale Critchlow

>Sorry, I didn't get back earlier about the dust buildup in my planer.

In answer to the question of what dust collector I use; I have a 5HP cyclone which moves a lot of air.

The fan is working fine. If I take off the hose, it blows chips across the room.

I have taken the hood off several times and cleaned it thoroughly. I can't see any obstructions. I have to clean it out after about 30 minutes of work. The dust gets into the gears that drive the lift mechanism and I have to dig that out with a screwdriver.

I may try installing foam insulation under the hood. The type which has a sticky side like you use to weatherproof doors.

Any more suggestions are very welcome!

Thanks,

Dale

Re: Dust buildup in Dewalt DW735 planer

#8

Re: Dust buildup in Dewalt DW735 planer

Ed Mulligan, Cape Cod MA

>Dale -

Is the 'dust' full of resin? Or moisture? Do you notice the build-up on different wood species? Is static electricity causing the dust to stick?

Re: Dust buildup in Dewalt DW735 planer

#9

Re: Dust buildup in Dewalt DW735 planer

Dale Critchlow

>Ed: The wood I have been using is all kiln dried and includes cherry and birch. I have noticed that there seems to be a lot of static charge. Would that cause the prevent the dust from going out the exhaust port?

Thanks,

Dale

Re: Dust buildup in Dewalt DW735 planer

#10

Re: Dust buildup in Dewalt DW735 planer

Dale Critchlow

>Ed: You might be right about the static electricity. I have a insulating hose between the cyclone and the main pipe. I had the pipe apart a few weeks ago and I noticed recently that I forgot to reconnect the shorting wire between the pipe and the cyclone.

On the other hand, the last five feet or so is a 4" plastic hose with no imbedded wire. So it has never been completely grounded and was it working fine before.

I will try putting the shorting wire back and see is it helps when we get home after Christmas. I will also try putting a discharge wire inside the plastic hose to see if that helps.

Thanks,

Dale

Re: Dust buildup in Dewalt DW735 planer

#11

Re: Dust buildup in Dewalt DW735 planer

Ed Mulligan, Cape Cod MA

>Dale,

I doubt static electricity could stand up to a 5 hp cyclone, but other than the static cause I'm out of ideas. Hope your ground wire fix works! Let us know what you find out.

Re: Dust buildup in Dewalt DW735 planer

#12

Re: Dust buildup in Dewalt DW735 planer

Dale Critchlow

>Ed: I tried grounding the ductwork, but it had no effect. I took the cover over the blades off and examined it carefully. I put a straight edge on it and there didn't seem to be any warping.

There is a thin rubber strip around the bottom of the cover. When it is fastened in place there seems to be a little space under it in the middle. So it may be slightly warped. I think my next step will be to install some 1/4" foam weather stripping to see if that helps.

Thanks,

Dale

Re: Dust buildup in Dewalt DW735 planer

#13

Re: Dust buildup in Dewalt DW735 planer

Ed Mulligan, Cape Cod

>Dale,

Thanks for the follow-up.

Too bad the ground didn't work. Is there any chance you could post a photo of the dust buildup? That might jog some dormant brain cells :)

Re the gasket, hope it works!