Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Craftsman 12" planer

Posts

Craftsman 12" planer

#1

Dale Lenz

Craftsman 12" planer

Dale Lenz

>Gotta a lead a 12" Craftsman planer that a guy used in his school's woodshop back in 1965. Takes all two guy have to load in a pick-up truck. Has two motors, cutter-head and feed, both are 110v, Power cord is for 220v. Google: found a Craftsman/Parks, one motor. What other kinds of planers did Sears sell back then? Gonna go look at it in a week or two or three.

Re: Craftsman 12" planer

#2

Re: Craftsman 12" planer

Virgil Johnson

>Google "Belsaw" planer and see what you can find. Most likely its one of these. They are a primitive design but bullet proof. I've used one for 22 years now and it works great for me. The previous owner put a 5 hp motor on mine and it does not bog down.

Re: Craftsman 12" planer

#3

Dale Lenz

Re: Craftsman 12" planer

Dale Lenz

>Thanks, for the info. I thought about asking the owner over the phone if there was any sheet metal, but forgot. Good to hear you like the Bell-Saw planer

Re: Craftsman 12" planer

#4

Belsaw

del schisler

>

Re: Craftsman 12" planer

#5

One thing that could be better.

Virgil Johnson

>Is the system for wedging the blades in place. The aluminum wedges that hold the blades in the slots are forced upward by a 3/8 set screw. This has a tendency to push the blade upward as it is tightened down. If it pushes the blade too far there is no good way to get the blade back down a thou or two. I got motivated today and changed the blades in mine and felt I was very lucky to get them within +-.002 of each other. Then again I'm not very good. Slow too.

Re: Craftsman 12" planer

#6

Re: Craftsman 12" planer

Basil

>I sold a 12" Belsaw planer yesterday with a 5 horse single phase motor. I bought it for the old heavy duty 5 horse motor....but a friend had a "Craftsmans" 2 horse just like it that needed some parts so I sold it to him. It was in very good condition except for the feed rollers and his had good feed rollers.

I sold it for $150....that 5 horse was to be the backbone of my dust sucker.....oh well, back to the hunt.

Re: Craftsman 12" planer

#7

Dale Lenz

Re: So.....

Dale Lenz

>Does the Belsaw have one motor or two?