Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Chair Geometry

Posts

Chair Geometry

#1

Chair Geometry

Charles Sharp

>I'm in the process of designing a chair and would like to shape the back and seat similar to a Maloof style rocker. Can anyone provide me with dimensions for the scoop out of the seat and the shape of the back?

Please respond to Fish_90605@yahoo.com

Re: Chair Geometry

#2

JL

Re: Chair Geometry

JL

>Can't quite help you with a Maloof Rocker - I haven't made one. However - I typically drill my depth holes 3/4" to 7/8", depending on my seat thickness. So, for a 2" seat blank, I'd drill to about 3/4" and scoop and sand to just below that.

I've seen pictures of the Maloof rockers, and I would say that it is probably similar.

Re: Chair Geometry

#3

Re: Chair Geometry

Glenn Madsen---in SF Bay Area

>Just took a class in chairs from Tim Killen, who writes for Fine Woodworking on their Design Forum. He's now done 2 Maloof chairs, based on the article Sam wrote maybe 15 years ago.

Here's the deal. The geometry is not simple. And the drawings seem to be somewhat 'off'. Tim redid his rocker base twice, maybe more, on his second chair. And the student chairs, the dozen or so that were attempted in the group, are still in process, after a 14 week class. The last iteration is beautiful, comfortable, and done.

Now, I did a deacon's bench, in the Shaker style. The varnish is still curing on coats one and two...

See what you can find on FWW Sketchup design board.

Re: Chair Geometry

#4

Re: Chair Geometry

Charles Sharp

>Can you provide any help on the back? It almost looks like an "S" shape.

Thanks for your reply!

Re: Chair Geometry

#5

Furniture Dimension Standards *LINK*

bricofleur

>Charles,

I while ago I posted a chart about Furniture Dimension Standards on my website. It may help.

Best,

Serge

http://www.atelierdubricoleur.spaces.live.com


Furniture Dimension Standards

Re: Chair Geometry

#6

Re: Chair Geometry

Barry Irby

>I attended one of Sam's seminars at Highland Hardware and the question of the shape of the slats came up. Same took one and held to his own back and said that's how he fitted it.