Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Toy Box/Wheels question/

Posts

Toy Box/Wheels question/

#1

Toy Box/Wheels question/

Barry Irby

>I am making a toy box for my niece. Made of walnut from the family farm. Dovetailed corners in 15" wide boards with a base around it like a skirt. 40" by 18"

I occurred to me that I could put wheels/castors on it, hidden by the skirt. Is this a good idea? Or does it change it from being a future Hope Chest to being a cute toy box? Wheels or no wheels?

Re: Toy Box/Wheels question/

#2

Re: Toy Box/Wheels question/

Lewis Dodd-aka-- RIPSAWED

>Well Barry, I put full swivel 2"casters on the one I built for my grandson, think I sent you a picture. They are recessed, and you can barely see them. The box edges are about 1/2" to 3/4" off the floor. Didn't think about wrapping them with a skirt, that would have been easier. That sucker can move anyway you want to. This hasn't been tested yet and I was wondering if it would be too mobile on a wooden floor or how it would react on carpet or a rug. Figured they could flip it over and take em off if they wanted too. One of the "secret" compartments is between the casters. The other two are a"double " bottom in the box and one in the tray at the top. Glad you are ok from the table saw episode! Show your niece the price you paid for the toy chest! At least wear it with pride as a "medal" for the endeavor you are doing!

Lewis

Re: Toy Box/Wheels question/

#3

Re: Toy Box/Wheels question/

Barry Irby

>You did send a picture. Thanks

I have been thinking about your secret compartment idea, but Christmas is coming. The tray sounds like a good idea too. Trying to keep it simple.

My wound is minor. More of a reminder and a surprise than anything else. Many years ago I had a serious kick back when the only tool I had was a RAS and I was ripping a thin piece of stock. It shot it right through a gallon can of lacquer thinner. Did not even knock it over. I smelled it before I knew what had happened. This one has got me thinking again. I generally don't stand directly behind the rip. I worry about he tiny pieces between the blade and the fence. Now I have to keep an eye on both sides of the blade. Had a friend that got a kick back ripping on a Shopsmith. An Inch the other way and he would have lost an eye.

Re: Toy Box/Wheels question/

#4

Re: Toy Box/Wheels question/

larry in kansas

>We have a toy box with wheels and it works very well. But be careful if you have a wood floor, the wheel will leave marks on the floor. Larry in NW Ohio