Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Installing glass in cabinet doors

Posts

Installing glass in cabinet doors

#1

Installing glass in cabinet doors

Ben Ragusa, S. Jersey

>Good afternoon,

I have a couple kitchen cabinet doors that need to have glass installed in them and I need advice. The cabinets are a few months old and we are just now getting round to the glass installation. (Christmas is right around the corner, ya know...) The doors are rabbeted, and also have a deep groove about glass thickness away from the inside corner of the rabbet. It seems to suggest that a spline of some sort is intended to hold the glass in place. I'm not familiar with this method, but I know some of you will be. What would the spline look like? Is it a common stock molding, or should I make something up in the shop? Also, I think it would be good idea to use clear silicone or something to prevent rattles. Any thoughts? Your advice is always appreciated.

Re: Installing glass in cabinet doors

#2

Re: Installing glass in cabinet doors *LINK*

Fred Davis

>Ben, here's a way I use that never fails .

Clear PolySeamSeam will bond the glass and wood forever.

Silicone works , but I prefer PolySeamSeal because it cleans up with water and in the event that your cabinet is painted , it will accept and hold paint while Silicone doesn't and it is a powerful adhesive caulk.

The groove you speak of may be meant for some type of Glaziers points though a groove isn't required.

You may also like the appearence of molding you make better then the PolySeamSeal , but you can't beat it for curved door profiles.

FredD

http://picasaweb.google.com/FredD17209/GlassStop?feat=directlink


http://picasaweb.google.com/FredD17209/GlassStop?feat=directlink

Re: Installing glass in cabinet doors

#3

Here's what you want. *LINK*

Lee Schierer - McKean, PA

>I've installed several pieces of glass using that type of groove system. Woodworker Supply sells what you need. You cut it to length with scissors or a sharp knife with mitered corners and push it into the groove with a putty knife or flat screwdriver.

Lee


img

Glass Retainer

Re: Installing glass in cabinet doors

#4

That must be it!

Ben Ragusa, S. Jersey

>Thanks Lee! That must be the right stuff. I've never seen that before, so I'm glad I asked. Thanks again for your help.

Re: Installing glass in cabinet doors

#5

Neat work

Ben Ragusa, S. Jersey

>Thanks for the suggestion Fred. Nice work too.