Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Made some earrings this weekend

Posts

Made some earrings this weekend

#1

Made some earrings this weekend

AndiWolfe

>I'm enjoying the challenges of working in the small scale necessary for earrings. These are carved or carved and textured; longest set have 1 7/8 X 1/2 inch dangles. The wood is Carolina Cherry burl, components are sterling silver.

Comments are always welcomed. Thanks for taking a look - Andi

Carolina Cherry Earrings

Carolina Cherry Earrings

Carolina Cherry Earrings

Carolina Cherry Earrings

Carolina Cherry Earrings

Carolina Cherry Earrings

Re: Made some earrings this weekend

#2

Re: Made some earrings this weekend

Barry Irby

>Very nice, I like them.

A question. The symmetrical ones. Do you see them as specifically left and right? That is, does it matter which one goes on which ear? Or do they rotate/swivel.

Thanks for posting these, I am going to have to try some. 40 years ago when I was in high school, wooden rings were all the rage. I figured out how to make them on a Craftsman monotube lathe I had bought. Must have given away fifty. Seems like yesterday.

Re: Made some earrings this weekend

#3

Re: Made some earrings this weekend

AndiWolfe

>Barry - I make them asymmetrical so that the pair frames the face. I prefer the long points next to my face, but they look nice the other way as well. Thus, I tend to have a right-hand and left-hand orientation when I put them on. The only ones I've not made this way are the oblong rectangular ones and the cutout triangle shaped dangles (posted in the same Flickr album - just navigate to the set when you click on one of the photos).

The dangles are carved front and back. I think I match them pretty well, but each one is unique, which is part of the charm of the sets.

Thanks for taking a look at them.

Re: Made some earrings this weekend

#4

Re: Made some earrings this weekend

Philip Duffy

>Andi, Are these conical forms or flat? Is there a problem with weight, or are they super-light? How did you find the complimentary silverware hangers? Lovely to see an innovative idea like you seem to have a gift of. Thanks. P.

Re: Made some earrings this weekend

#5

Re: Made some earrings this weekend

AndiWolfe

>Philip,

These are carved on both sides - convex on the front and usually concave on the back. Some of the dangles are carved to be convex on both sides.

They are very light weight - much lighter than metal or stone, but I suspect a dense tropical hardwood would be slightly heavier. I can compensate for that by removing a bit more wood on the back side of the dangle. I wear a lot of different styles of dangles and these are the lightest of all my earrings. I'm going to try to carve some sets from an acrylic pen blank I sliced. That material is heavier than the wood I've used thus far. It's not nice material to work from the smell point of view and so this experiment may be short-lived.

Findings for earrings are widely available from many different sources. Do a google search on "earring findings" and you'll see hundreds of listings. I like Rio Grande jewelry and so I purchase my supplies from them.

Re: Made some earrings this weekend

#6

Classy !

Don Orr

>These are really nice and stylish. Very nicely done as are the last batch you posted. Just what I need, another excuse to save tiny scraps ;-))

Re: Made some earrings this weekend

#7

Re: Classy !

AndiWolfe

>Thanks! Tiny scraps come in pretty handy for lots of different things.

Re: Made some earrings this weekend

#8

Dick Hines

Re: Classy !

Dick Hines

>I will have to keep my wife away from this post. She will have me doing ear rings for all her friends. And will want them all done by Christmas.

They look great Andie

Re: Made some earrings this weekend

#9

Re: Made some earrings this weekend

Fred Davis

>My wife doesn't wear earrings and that is a damn shame,because those would make great Christmas gifts.

While I was looking at them I wondered if you have ever tried something like that in bone?

FredD

Re: Made some earrings this weekend

#10

earrings as Christmas gifts?

AndiWolfe

>Cool idea. If anyone wants a set for a spouse, girlfriend, mother, daughter, other female in one's life:

http://www.etsy.com/shop/ArtByAndiWolfe

I've thought of bone and alternate materials. I have a piece of giraffe bone that Jean Fran�oise Escoulen gave me, which will be worth a try - probably will turn this material. I'm going to play with some acrylic this week, and I'm planning on purchasing some tagua nut soon.