Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Toy box question.

Posts

Toy box question.

#1

Toy box question.

Barry Irby

>My niece is six and I thought i would make her a toy box for Christmas that might turn into a keep sake box later. I have some walnut boards that are 14" wide. My planer is only 12". I have a Performax but don't usually use it to prep stock. So, I could rip these boards, plane them and glue them back together or take the time to run them through the Performax. If they are not wide enough and I have to glue them up anyway, there is no question. I'm planning to make the box with dovetailed corners and a bracket foot base under it, so the box will be about 18" tall total.

So, Is 14" deep enough for a toy box?

PS, any suggestion on the other dimensions?

Re: Toy box question.

#2

Re: Toy box question.

Virgil Johnson

>40" wide 20" deep and a box height of 22"(around 26" height total) makes a good size toy/blanket chest. 14" is not tall enough IMO.

Re: Toy box question.

#3

Re: Toy box question.

Lewis Dodd

>Barry--

Just finished one for my grandson. I made mine 18"X18"x48" with arms and a back of spindles and three "secret compartments". Been having trouble with a lock selection (kids like locks of their own), bout decided on a tambour or a roll top desk style. I highly recommend the lid supports. I used them plus a piano hinge. They make the lid supports that also work as a hinge but I opted for both. Remember, most lid supports do not allow more than about eighty five degrees swing on the lid. A personalization of the box is a great touch, her name should be on that sucker. I put his nickname on the top of the lid, and his full name on the front. My "signature" is on the inside of the lid.

I gotta admit it looked awful big in the shop, but his mother liked it and I am sure he could almost fill it now even if he is not a year old.

I downloaded some plans and modified them to my own liking. Best of luck, it was fun working on and looks pretty good if I say so myself!

Lewis

Re: Toy box question.

#4

Re: Toy box question.

George@Colonel's Workshop-Havertown PA

>Gpod Afternoon Barry,

I built a coopered lid toy box for one of my granddaughters a couple years ago. See shop shot 770. It was about 39 1/2" long, 15+" wide and about 18" deep with lid closed. The frame for the feet is an "add on". I decided the chest needed that feature to look balanced. I think it is a well-sized piece which fits well in a living room or family room, and looks great when the lid is closed.

George


img