Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Bandsaw blade stock

Posts

Bandsaw blade stock

#1

Bandsaw blade stock

Will Abbott

>I have an old 3 wheel bandsaw that was given to me by my wife's grandfather. It works fine, and has a large homemade table that is very nice. But I can't find blades to fit it. I know you can buy rolls of blade stock, and I have a friend with a blade welder, but I can only find rolls for heavy duty metal cutting. Does anyone know of a source 1/8" to 1/4" wood cutting blades.

Thanks,

Will Abbott.

Re: Bandsaw blade stock

#2

Re: Bandsaw blade stock

Barry Irby

>Good idea. I can't help you with the blade stock, but if you can find a local saw shop they will make up blades any length you want. They may even sell you the stock and let you weld it.

Re: Bandsaw blade stock

#3

Re: Bandsaw blade stock *LINK*

Bill Houghton, Sebastopol, CA

>There are saw shops that will weld up any length of band saw blade you need. I am blessed by a local shop that specializes in this, linked below. I've purchased several blades from them, and they've been excellent blades - good straight welds that have been cleaned up so there's no "bump" at the weld.

Woodcraft used to do custom-length blades, too - you might call them to check. Woodcraft is a Wood Central advertiser, so, if you do order from them, tell them you found out from WC, or ask how you can order through the Marketplace link here (see left at the message index for "Marketplace") - Ellis gets a payment for orders through the Marketplace.


http://www.hastingssaws.com/

Re: Bandsaw blade stock

#4

Re: Bandsaw blade stock

Dick Coers

>I shop on eBay for complete rolls. I think I paid $50 for the last 150' roll of 3/4, 3 tpi. I grind a skive joint on my disc sander and use silver solder. Works great!

Re: Bandsaw blade stock

#5

Re: Bandsaw blade stock

Bill Tindall, E.TN

>1. Everywhere has a Lenox dealer. They can order what you want.

2. Every industrial supply sells stock- MSC, Travers, Grainger, etc.

3. Order the custom made blades. Unless you do a lot of sawing you will never use up a 100' roll of stock. One source I use is Misenheimer in Morristown TN 423 587 4300. They will be $10 or less per blade.

Re: Bandsaw blade stock

#6

Re: Bandsaw blade stock

Thomas S Stockton

>I've used Hastings for about 20 years and can highly recommend them. They used to sell a special band just for 3 wheeled saws that was supposed to have a much better life span.

You could also try suffolk machinery another well regarded manufacturer.