Didn't change mine
Bill Tindall, E.TN
>For this sort of thing the "rails" can be equal or the top one a bit smaller. These are small parts and presumably this thing is held together with mortise and tenon such that it can be dry assembled. Make two parts, one larger and one the same size, assemble each configuration and see what you like best.
What is going to make this thing look good, or not, is the proportion of the side to top. If this proportion is off it won't matter whether the top is the same or smaller than the bottom. Hence, a little experimentation may be prudent. It is going to look sharp when you get these proportions right.
One thing I learned when visiting Krenov's college. The students there would likely have mocked up something like this out of scraps to get these proportions right.