Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

ot: road biker question *LINK*

Posts

ot: road biker question *LINK*

#1

ot: road biker question *LINK*

e

>i'm trying to sell a cannondale r1000 that's was used for 2 months then put into storage hanging in my closet for years ...

would any of our woodworking-bikers have an idea what a fair price is for this?

http://home.pacbell.net/ecl01//cannondale/cannon_r1000_a.jpg

http://home.pacbell.net/ecl01//cannondale/cannon_r1000_b.jpg

http://home.pacbell.net/ecl01//cannondale/cannon_r1000_c.jpg

http://home.pacbell.net/ecl01//cannondale/cannon_r1000_d.jpg

http://home.pacbell.net/ecl01//cannondale/cannon_r1000_e.jpg

http://home.pacbell.net/ecl01//cannondale/cannon_r1000_f.jpg


http://home.pacbell.net/ecl01//cannondale/cannon_r1000_a.jpg

Re: ot: road biker question *LINK*

#2

Re: ot: road biker question

davhamm

>Wow 8 speed in the back. Must be an old bike.

Can't tell what type of wheels. I can't believe it will get much, looking at what I think are new ones are selling for on ebay.

You could try asking at slowtwitch.com but the crowd can be a bit rough at times just ignore the smart allics

Re: ot: road biker question *LINK*

#3

Re: ot: road biker question

Andy Halterman: Night riding season

>There's a 9sp version from '04 on the 'bay for $995.

I'd figure 1/3 to 1/2 of new price. These days, if it ain't carpet fiber, it ain't cool.

Andy Halterman

Pedaling around on his curmudgeonly steel road bike in Hendersonville, NC�

Re: ot: road biker question *LINK*

#4

Re: ot: road biker question

e

>thanks for your info ...

helps a lot!

e

Re: ot: road biker question *LINK*

#5

Re: ot: road biker question

Randy Johnson

>Pedaling around on his curmudgeonly steel road bike in Hendersonville, NC�

My favorite bike is my 84 Trek 720. It may be out of fashion but the guys at the bike shop still drool over some of the components when I take it in for a tune up.