Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Friends in the shop - legal protection question?

Posts

Friends in the shop - legal protection question?

#1

Friends in the shop - legal protection question?

Stephen Kirk in Quakertown PA

>I've worked with some friends in my home shop and I've had some requests to do some simple projects with people. Money doesn't change hands at all, as we often barter - I'll work with them on a project if they help me with something. I don't always like to think in legal terms, but should I take any steps to protect myself if someone is hurt? We've done other "events" at our house, like canning parties, pasta making, brewing, etc - but there is a big difference in the risk of serious injury between making pasta and using woodworking machinery.

Not sure if I'm over-worrying here or not? Any thoughts?

Re: Friends in the shop - legal protection question?

#2

Re: Friends in the shop - legal protection questio

Thomas Skaggs, Foothills of Mount Level

>I don't know the legal issues. I do have friends or neighbors who have asked for workshop related favors. My policy is that they are welcome in the shop but I will operate the tools. My reasons:

1)I cannot assume they know how to operate tools safely.

2)Besides liability, I worry for loss of friendships should a bad accident happen.

3)If I run the tools the job will get done faster and I can get back to my own work!

4)I don't want to risk damage to my tools by an unskilled user.

So I say "come on over"...but please let me operate the tools.

Tom

Re: Friends in the shop - legal protection question?

#3

Good advice

Stephen Kirk in Quakertown PA

>I was thinking that if they want to do a project, I may handle the major work, things like table saw, jointer, etc. They can then help out with other operations, even if it's catching on the TS or planer. Hand tools for finishing and fitting I'm pretty OK with people using (but they'll stick around and correct and edge if they ruin something!).

Re: Friends in the shop - legal protection question?

#4

Re: Good advice

John Lucas

>The only advice I could give would be to talk to your insurance agent. There are a lot of implied things that we assume might be covered that are not (read the really really fine print)

I worry about that when I have turning days at my house but as a member of the American Association of Woodturners and this is a club function we are covered by them. I don't teach at my house because the insurance is too expensive. I have worried about the few times when friend comes over and I help them with a turning.

Re: Friends in the shop - legal protection question?

#5

I agree with all of that

Bruce, a MN Galoot

>I would much rather do the work for a friend or neighbor than trust that they knew what they were doing.

Used to have a next-door neighbor who wanted to use my bandsaw one time. I asked if he knew how, to which he responded that heck yeah, his dad was a shop teacher. First thing he did was run the upper guide all the way to the top, leaving all the blade exposed. I stopped him on the spot, set it up right and did the job for him.

OTOH, the guy across the street has used it without my help, but then he used to work in a cabinet shop. He's the exception, though.

Re: Friends in the shop - legal protection question?

#6

Re: Good advice

Gerald Gibbs

>Number one re liability is adequate homeowners liability insurance. I doubt the insurance company will ask about the home workshop. They will be very concerned about the type of dog you have (seriously). An umbrella policy with high limits is not that expensive. The cost of defending a lawsuit is as significant as liability exposure. Jerry Gibbs

Re: Friends in the shop - legal protection question?

#7

Re: Good advice

Yonak

>You'd think an insurance company would be more concerned about a mean dog, or a swimming pool, or an open fireplace, or a large overhanging tree than a woodshop, but as soon as my former insurance company found out about my woodshop, they dropped me like I was on fire. They have to show their backers they are active about screening risks and a woodshop is rare enough and dangerous-sounding enough that they can afford to drop woodworkers and still not affect their income too much and not really reduce their exposure, in fact.

I was fortunate to find a company that would insure me and my woodshop and even add special liability insurance for my business in my home, and a pretty low premium.

Re: Friends in the shop - legal protection question?

#8

Re: Friends in the shop - legal protection questio

Lewis Dodd

>Well, my comment is to say :

"choose your friends carefully or just say no- they are using your money investment while driving new vehicles or going to the islands for vacations, they can buy the tools the same as you! NO is a part of the English language! They will get over it or ya didn't need em in the first place.

Lewis

Just took me 65 years to quit loaning and absorbing someone else's mistakes!!

Re: Friends in the shop - legal protection question?

#9

Re: Friends in the shop - legal protection questio

BrianA

>All good thoughts, But the real question is what were you brewing? Homebrew MMMMM!

Brian

A home brewer also

Re: Friends in the shop - legal protection question?

#10

Re: Friends in the shop - legal protection questio

Stephen Kirk in Quakertown PA

>Yep, homebrew. Worked with a buddy back in the summer, put up three batches. Chocolate Porter, Spiced Orange and Canadian Lager. Been a little lax in the fall but I had around 6 cases of beer to drink through (and I've backed off the beer drinking to manage the weight, ya know).

Re: Friends in the shop - legal protection question?

#11

Clint Searl

Re: Friends in the shop - legal protection questio

Clint Searl

>Injuries that occur on your property are your liability. Keep your insurance up to date.

Clint

Re: Friends in the shop - legal protection question?

#12

JL

Re: Friends in the shop - legal protection questio

JL

>I've "mentored" young men as part of a program in my old church. I was quite clear as to the risks with their parents. I started out using the big stuff until we were both comfortable with them handling the equipment.

As for neighbors - I usually do the stuff for them. It is easier.