Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

anyone adapt their Jet CS to take splitters?

Posts

anyone adapt their Jet CS to take splitters?

#1

anyone adapt their Jet CS to take splitters?

arw01

>I've ordered a bracket for a later model Jet CS to try and adapt it to mine. The fact that I have no guard has been weighing heavily on me the last year or so.

Lee's Shark Guard is what I want to go with, but I didn't have a place to mount it. Hopefully this will work.


img

Re: anyone adapt their Jet CS to take splitters?

#2

Re: anyone adapt their Jet CS to take splitters?

Chuck in ND

>Biesemeyer sells a splitter that is pretty nice, but outrageously expensive. I wouldn't mind one, but I don't feel like donateing to the CEO's bonus at the end of the year.

Re: anyone adapt their Jet CS to take splitters?

#3

Re: anyone adapt their Jet CS to take splitters?

Randy Johnson

>The other real drawback to the Beis splitter is that you have to use wider blades.

Re: anyone adapt their Jet CS to take splitters?

#4

Re: JET / Splitters

Mark Mandell - Gone Round In Jersey

>It was easy to mount a Delta Unisaw removable splitter in my JET cabinet saw. That is NOT the Biess pop-up job. It's not, however, a riving knife that retracts and allows dado cuts without removal.

Part comes as a kit, and was IIRC, about $30.

Hope this helps, but it's been so long, I don't have the Delta part number anymore.

Re: anyone adapt their Jet CS to take splitters?

#5

Re: JET / Splitters

Glenn Madsen---in SF Bay Area

>I put one of these on the Unisaw in 2001, and it works well. Don't mind the non-popping design, and the price was cheap...

Re: anyone adapt their Jet CS to take splitters?

#6

Re: Are you referring to an insert & splitter? *LINK*

North of the Border

>If so, WS has an article (and video, too) on making the zero clearance insert and splitter.


insert & splitter

Re: anyone adapt their Jet CS to take splitters?

#7

There's one for sale on the Bennefits Auction Page *LINK*

Jennifer@Indy.USA

>I have a splitter for sale over on the Benefits auction page. It has never been used and is made specifically for the JET or General contractors saw. It's still in the box with all the packaging. New it runs nearly $200. make a big, get a great splitter and at the same time you'll be donating to the best website for woodworking on the internet!

Jen


CLICK HERE TO GET TO IT