Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Pecan Anybody?

Posts

Pecan Anybody?

#1

Frank in Colorado Springs

Pecan Anybody?

Frank in Colorado Springs

>I was given some Pecan today and am not sure what to do with it. It is 8/4, various lengths & widths from 4"-6" wide and 2'-4' long.

I've never worked Pecan and was wondering if it had any unique properties that lent themselves to a specific use.

Re: Pecan Anybody?

#2

Re: Pecan Anybody?

R Payne

>Pecan is excellent for tool handles and mallets.

Re: Pecan Anybody?

#3

A lot like Ash or White Oak

Phil Joines Krum,Tx

>

Re: Pecan Anybody?

#4

Re: Pecan Anybody?

Victor Parisian

>Best Bar-B-Que wood there is. Smoked a lot of briskets and a couple of turkeys over pecan. Can't miss.

I have some pecan drying in the shed, that I'm starting to turn into short boards for a future project. It is damned hard. Maybe I'll smoke another turkey instead.

Victor

Re: Pecan Anybody?

#6

JL

Pecancrete is a great wood.

JL

>I don't like working it too much with hand tools unless it is green.

Takes a nice edge and it is a pretty wood. I did a set of legs and stretchers out of pecan. Went well with a butternut seat.

Re: Pecan Anybody?

#7

Frank in Colorado Springs

Very nice, Fred. Do you mean

Frank in Colorado Springs

>that Pecan works similar to Hickory? I made my kitchen cabinets out of Hickory and really liked working with it.

Re: Pecan Anybody?

#8

Frank in Colorado Springs

Re: Pecan Anybody?

Frank in Colorado Springs

>I didn't know that. Some of the smaller pieces will very likely become chisel handles.

Re: Pecan Anybody?

#9

Frank in Colorado Springs

Re: Pecancrete is a great wood.

Frank in Colorado Springs

>JL, my first thought was that some of these 8/4 pieces might make great legs on smaller projects.

Re: Pecan Anybody?

#10

Frank in Colorado Springs

Re: Pecan Anybody?

Frank in Colorado Springs

>I don't think I'll burn this stuff up, Victor. I've still got lots of hickory off-cuts from by kitchen cabinets project. I'm sure there will be some scraps & they will probably find their way into my smoker.

Re: Pecan Anybody?

#11

I believe they are very similar...

John in NM

>I'd always understood that "hickory" as sold in the lumber yard was any one of a number of species (like soft maple) and that pecan was one of them - being of the same genus.

I've been meaning to look for some 8/4 hickory, I've mostly seen it in 4/4 as its supposed to be kinda tricky to dry. I have a project that requires pieces about 4 1/2" x 3 1/2", feel free to drop me a line if you have any scraps you'd like to sell.

Re: Pecan Anybody?

#12

Lee Grindinger

The difference

Lee Grindinger

>The difference is nearly indiscernible.

Re: Pecan Anybody?

#13

Pecan=Hickory

Bill Tindall, E.TN

>Once it passes through the saw mill what went in as hickory comes out as "pecan". This transformation occurred some decades ago when "pecan" furniture became popular, perhaps because "nuts" sounded better than "hammer handles". Currently there is so little demand for "pecan" lumber that I find it left in the woods after logging operations. However, it can be a pretty wood in the right kind of furniture. I think it makes lovely kitchen cabinets and flooring.

Re: Pecan Anybody?

#14

Re: Very nice, Fred. Do you mean

Fred Davis

>Very similar in looks , hard and dense and heavy.

Has a open grain much like Ash rather then a closed one like Maple.

Keep you tools sharp , takes stain very well without blotching and I used CAB Lacquer for the finish.

Stain in my case was Watco -Denis Medium Walnut oil, left to dry three days and Lacquered.

My own persnal opinion is to leave a knot or two somewhere on the project for this wood.

FredD

Re: Pecan Anybody?

#15

Re: Pecan Anybody?

Lewis Dodd

>Have a lot of it asround here, my experience is it is like turning CONCRETE!!!!

Lewis