Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

OT 5 days left

Posts

OT 5 days left

#1

OT 5 days left

Dustmaker Mike

>to work this year YIIIPPPEEE. Of course it is not at home it is in Phoenix. I don't need my passport it is only a few hour flight and I think they still speak English (American)there(-; So it is not all that bad.

Now is there any good place to get some larger pieces of mesquite so I can make a salt and pepper mill along with a few pens?

I will be in Chandler if that helps.

Re: OT 5 days left

#2

How big a piece do you want?

Phil Joines Krum,Tx

>

Re: OT 5 days left

#3

Not sure

Dustmaker Mike

>I would like to make a Salt and Pepper mill and around 4 pens. The pieces for the pens are pretty easy the blanks for the salt and pepper mills I think should be 3x3x 10 or 12 I have not made any mills so I am not so sure of the blank sizes. Thanks

Re: OT 5 days left

#4

Re: OT 5 days left

mdclor

>I just checked in Woodfinder and located this as the closest. I know nothing about them.

Search Results

Here is the information on the supplier you selected.

Please tell them Woodfinder sent you!

Send this page to a friend!

Woodworkers Source - Store #1

Contact: Doug Johnson

Address: 645 W. Elliot Rd Get a Map!

Tempe, AZ 85284

Phone: 480-355-5090

HTH!

Re: OT 5 days left

#5

Re: OT 5 days left

Howard Norman

>Mike,if Woodworkers Source have Mesquite it would be a great place to buy it. You should drive over to the store anyway and check it out. They are a great bunch of guys! I deal with the store off of I17, north of town, these days since it is more continent for me.

howard

Re: OT 5 days left

#6

Re: Not sure

Phil Joines Krum,Tx

>All the pepper grinder hardware I've seen take about an 1 1/2" hole and can be any length.

Re: OT 5 days left

#7

Re: OT 5 days left

Lewis Dodd

>Where you live and whatcha got to trade? Mesquite is in abundance here and my favorite wood to turn, green or dry, never moves. The center is most often punky tho. Often takes a lot of super glue.

Here is Fredericksburg, Texas, just north of San Antonio 65 miles and it is SNOWING RIGHT NOW!!!

Regards

Lewis

Re: OT 5 days left

#8

Re: OT 5 days left

Howard Norman

>I meant to say "convenient" to me.

Re: OT 5 days left

#9

Trade what trade

Dustmaker Mike

>I am not sure I have Big Leaf Maple with a lot of curl in it I have some Alder but most of it is long boards for flat work. The maple I have is around 2 inches thick but I am not sure the curl would show so good in the round. I live in the Cleveland OH area so Cherry Maple Oak and Eastern Red Ceder are all around me..

Re: OT 5 days left

#10

Re: OT 5 days left

John in NM

>Let me know if you don't manage to find any, I probably have a couple pieces that would work. I still have a couple friends in Tucson that do mesquite work, so I usually go around begging scraps when I visit. Most of the mesquite you find in AZ comes up from Sonora, as the trees don't get as big as in TX or Mexico - just not enough rain. I have seen some huge planks from trees in the river valleys that run year round. Most of the AZ wood I've seen looks just like the Sonoran, but less red than what comes from TX.