Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Cheap Grinder Stand

Posts

Cheap Grinder Stand

#1

Cheap Grinder Stand

Tom MacGregor

>Sometimes setting up your shop on a budget just means keeping your eyes open. The grinder is now bolted down, not clamped as in the photo. A threaded rod up the center (also salvaged) and a couple of fender washers clamps it all together.

Scrap of plywood............................$0.00

Old Chunk of pipe...........................$0.00

Patio Table Base Scrounged from the

Metal bin at the Recycling Depot..........$0.00

Fanciest Grinder Stand in the Neighborhood...Priceless!


img

Re: Cheap Grinder Stand

#2

Very clever and classy

Bill Houghton, Sebastopol, CA

>Those umbrella bases have lots of uses, don't they?

Re: Cheap Grinder Stand

#3

Ellis Walentine

Wow, I could use one of those

Ellis Walentine

>

Re: Cheap Grinder Stand

#4

Re: Cheap Grinder Stand

Bruce, a MN Galoot

>I've seen discarded automotive wheels used, but never something with so much style.

Good going!

Re: Cheap Grinder Stand

#5

Re: Cheap Grinder Stand

Joe in a Cleveland suburb

>I did the same thing for holding bird feeders. The black poles/pipes fit nicely into these bases.

Works great.

Re: Cheap Grinder Stand

#6

Re: Cheap Grinder Stand

EHGsuss

>I've used a truck brake drum, a piece of 1/2" steel plate drilled to match the wheel mounting studs, a piece of pipe welded to that plate and one at the other end drilled to accept the grinder, and if it's not heavy enough, concrete poured into the drum. Not as pretty, but just as effective and cheap. Made a stand like that for a vise also.