Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

OT: HW Floor Finish

Posts

OT: HW Floor Finish

#1

OT: HW Floor Finish

John Leech in 'rural' Festus

>I posted this very same question on a couple of other boards and the answers I received ran from "do it yesterday" to "please don't, it will bring about the end of the world as we know it." Like most questions of it's type I suspec the answer runs somewhere inbetween. That said, I thought that I'd post the question here to get the thoughts of those the WC folks.

"We have a walnut hardwood floor in our dining room that was installed about 21 years ago and it has started to look rather dull and dingy. There are also areas of the floor (corners, under the table) that have a small layer of crud. I was considering using something like this from Minwax:

http://www.minwax.com/products/hardwood_floor_finishing/hardwood_floor_reviver.html

Does anyone have any experience with this product. Also, what would be the best way to scrape the crud off the floor without actually damaging the floo itself?"

Thanks for your help,

JP

Re: OT: HW Floor Finish

#2

Re: OT: HW Floor Finish

Howard Acheson

>What finish is on the floors now?

Have you read the cautions on the Minwax site for that product? Look at the FAQ's and the Directions for that product.

Also, the reviver is not a cleaner. Minwax makes another product for that job.

Re: OT: HW Floor Finish

#3

Re: OT: HW Floor Finish

Dave Bair, Eaton Rapids, MI

>No input on the Minwax, but if the crud band is narrow, I've used a card scraper (filed square and not burnished to create a hook) to remove the upstanding buggers.

Re: OT: HW Floor Finish

#4

Re: OT: HW Floor Finish

Bill Tindall, E.TN

>I clean dirty furniture with steel wood wet with wax, mineral spirits or linseed oil depending on what the piece was finished with.