Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Irwin saw blades at Lowes

Posts

Irwin saw blades at Lowes

#1

Irwin saw blades at Lowes

Terry Alexander

>Lowes is running an add for 1 60 tooth and 2 40 tooth 10" saw blades.

Add says these are for a circular saw.

I don't think I have ever seen a 10" circular saw.

So, will these blades work on a table saw?

If so, any comment on the quality would be appreciated.

As always....TIA

Terry Alexander in West Texas

Re: Irwin saw blades at Lowes

#2

Re: Irwin saw blades at Lowes

del schisler

>they are calling them circular saw blades Which are for table saws I guess they call scroll blades scroll saw blades? and jig saw jig saw blades ? I guess if they are round they are circular ? their are no 10" What i would call skill saws Like 7 1/4" and maybe smaller Don't get into the size's for these probly a 6" also I guess you could ask do you have any round blade's ???

here is link for those http://www.lowes.com/lowes/lkn?action=productDetail&productId=20725-281-ICSLD3PK

Re: Irwin saw blades at Lowes

#3

Re: Irwin saw blades at Lowes

Fred Davis

>For many years Skil made a 12" model 77 with a altered table and guard that used a dado set to cut the bird's mouth for west coast roof cutters.

I had one of those and a ten inch model 77 for a long time.

They may not make them now , but in the seventies and eighties they did.

FredD

Re: Irwin saw blades at Lowes

#4

Re: Irwin saw blades at Lowes

GalenV in Iowa

>I bought that same set last year at Lowes to cut up some construction lumber to practice turning spindles. They are handled pretty rough at the store or on shipping. One blade was missing a carbide tooth and one lost a tooth on the first cut. Lucky it hit the insert and deflected away from me.

I got what I paid for. Cheap blades for rough cuts.

You cannot check for broken teeth the way they overlap in package.

I should have taken them back.

I cannot justify expensive blades on a 40 year old Craftsman table saw for what I use it for though.

Galen

Re: Irwin saw blades at Lowes

#5

Galen's right

Craig in Silverdale

>The blades are just what they say. Cheap. The carbide they use isn't the greatest, large carbide particles. But, they work well on construction woods. Don't think I;d want to rip and Cherry with them.

Re: Irwin saw blades at Lowes

#6

Big handheld circular saws

Bill Houghton, Sebastopol, CA

>Table saws are, of course, a form of circular saw - just not one you would hold in your hand.

Makita still lists a 10" circular saw, as well as a 16+" circular saw that is one of the most terrifying handheld tools I've ever used (once, and it took five years off my life; if I ever had to make a cut that deep again, I'd reach for my sawzall). I think some of the European makers who specialize in timber-framing tools, like Mafell, may also make big circular saws.

Re: Irwin saw blades at Lowes

#7

Re: Big handheld circular saws

Fred Davis

>Funny you should mention Makita , I have had the sixteen inch circle saw for years,bought it before OSHA banned it for sale here for a few years.

Greatest thing going to cut the plumb and tail cuts on common 2x6 rafters , one pass and they are all done at once , either all right or all wrong ;-))

Also use a Makita 14" chopsaw nearly every day I am in the shop, great for crown moulding.

FredD

Re: Irwin saw blades at Lowes

#8

Re: Big handheld circular saws

Barry Irby

>Thirty odd years ago a friend of mine had a contract to build some of the buildings at Kings Dominion. I went up there to help them with some layout problems. They were using a 16" hand held circular saw to make cheek cuts on hip and valley rafters, free hand. I can't believe nobody was injured or worse. The most terrifying thing I've ever seen anyone do one purpose and over and over.

Re: Irwin saw blades at Lowes

#9

Re: Big handheld circular saws

Fred Davis

>You have to pay attention when your using that size saw, other then that , I would say it is as safe as a chain saw and cuts much smoother.

FredD

Re: Irwin saw blades at Lowes

#10

Re: Big handheld circular saws

Dave Tenney

>We used to have one of those 16" Makita's! It was great for cutting off 6x6's...But that's about the only thing it ever got used for. We lost all of our tools about 10 years ago due to a theft and we never replaced it. Now we just use a chainsaw, which I feel safer using! You are right...There is something nerve racking about holding a spinning blade that big...

dave

Re: Irwin saw blades at Lowes

#11

Re: Irwin saw blades at Lowes

Gary Evans--Tallassee TN

>To answer your question, Terry, they will work on a table saw, but my experience is that they won't give you good service life. Plus, they are full kerf blades. I prefer a thin-kerf blade like the Diablo for my circular table saw. Save your money and buy better blades.

Gary

Re: Irwin saw blades at Lowes

#12

Yep they are cheap blades...

John Cotten

>But that said, when I have to rip old barn lumber for furniture or trim, a bunch of hickory, lyptus, or some other dulls your saw quickly lumber, I use them. Beats tearing up some of my high end Tenyru, Amana, or DML cabinet saw blades. Buy one and pitch it when I am done with that job.

Re: Irwin saw blades at Lowes

#13

Ellis Walentine

Hey John, nice to see you!

Ellis Walentine

>Long time no see. What've you been up to?

Ellis

Re: Irwin saw blades at Lowes

#14

Re: Irwin saw blades at Lowes

John Horner

>Cripedistributing.com has some very nice 10" blades at bargain prices right now. The old Oldham Signature Series 10" blades in a set including 24, 40 and 80 tooth blades for $48. These are nice US made blades from before Oldham got scooped up by Black and Decker and shipped off the China.

http://www.cripedistributing.com/oldham-pack-carbide-blade-100w3-p-5158.html?osCsid=dd61374b2a4008b9cce91ad9bc61e3ae

Also, this Delta 10x40 is a super sweet US made blade for only $17:

http://www.cripedistributing.com/delta-357657-purpose-carbide-blade-p-4457.html?osCsid=dd61374b2a4008b9cce91ad9bc61e3ae

If you still use a Radial Arm Saw, the Oldham Signature 10x60 thin kerf RAS blade is a real sweatheart deal at $26:

http://www.cripedistributing.com/oldham-signature-premier-carbide-blade-100w60-p-5150.html?osCsid=dd61374b2a4008b9cce91ad9bc61e3ae

My only affiliation with Cripe Distributing is as a repeat customer.