Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Wine Rack Plan

Posts

Wine Rack Plan

#1

Wine Rack Plan

jerryburns

>HELP I need to find a plan for a x shaped wine rack for SHMBO

need now it will be a small xmas gift that my sons age 7 and 3 will help build

thank you Jerry

Re: Wine Rack Plan

#2

Re: Wine Rack Plan

John McGaw

>Do you mean the cube which has an X-shaped divider fitting between the corners or some sort of free-floating X?

Re: Wine Rack Plan

#3

Re: Wine Rack Plan *LINK*

Scott in Montana

>David Marks has plans for that type of wine storage rack on his website. This one may be a little big but it could easily be scaled down. I've posted a link to it below.

Happy Holidays!

Scott in Montana


Wine rack plans

Re: Wine Rack Plan

#4

Re: Wine Rack Plan

Richard Jones

>I think mine wound up being something like 21-22" square, so I could use up an entire 1x10x12' from Lowe's. Mine rests on top of the fridge in the basement, so pretty isn't something that was a priority. Square the box, make the end cuts on the diagonals, insert them about halfway from each side, then mark and cut 1/2 the width. That saved me a lot of ciphering and stress. Drywall screws (remember my priority?), and if you cut the diagonals tight, a force fit will suffice. Back is optional. Not a lot of lateral stress here. Do a search for "wine cube" and you should get plenty of hits.

Rich

Re: Wine Rack Plan

#5

Re: Wine Rack Plan

jerryburns

>a free floating X for each bottle size will be 18"X24" I did the google thing but did not find what I was looking for

Jerry