Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Gluing to glass

Posts

Gluing to glass

#1

Gluing to glass

Yonak

>I have two small (2 1/2" X 21 1/4" X 7/8") cherry shelves left over from a project. I had this cockamamie idea of gluing them to the large guest bathroom mirror and put small knickknacks on them. Does this seem like something that can be done, and have them hold, or should I "shelve" the idea ?

Re: Gluing to glass

#2

Ellis Walentine

You should experiment

Ellis Walentine

>Typical glues that dry rigid will ultimately break the glass. (DAMHIKT) Yet, non-rigid glues such as silicone and Lexel, may not have the tenacity you want, unless you possibly make little mini-brackets to support your shelves. One technique I've used on many occasions is to drill holes in the mirror with a glass bit and then attach the shelves or whatever with round-or pan-head screws from the back. Be sure to use Filon washers to cushion the screw heads.

Ellis

Re: Gluing to glass

#3

Re: You should experiment

Yonak

>Thanks, Ellis. Sorry, I'm not familiar with the acronym. What's "DAMHIKT" ? (I'm a little nervous about sounding it out.)

Re: Gluing to glass

#4

Re: Gluing to glass

Ron Bauman

>Don't know if this will help, but most auto parts stores have a glue for replacing your rear-view mirror should it come off the windshield. I did it once and it was fine for the few more years I owned the car. Don't know if it will work with wood, but Ellis is right practice, practice, practice.

Re: Gluing to glass

#5

Re: You should experiment

Carol Reed - home in Strawberry

>DAMHIKT = Don't Ask Me How I Know This

Re: Gluing to glass

#6

Re: Gluing to glass

John E in SC

>That stuff is very thin. (I've installed dozens of these in my earlier life). I'm pretty certain it wouldn't work with wood. Just a thought though, the little metal buttons that hold the rear-view mirror on the glass are basically dovetail shaped. If you could come across a couple of those buttons (Salvage yard should have ample supply), you could make a sliding dovetail in the shelf bracket and just slip it over. They're probably about an inch wide though, so your shelf would have to be pretty beefy.

Re: Gluing to glass

#7

Clear Silicone Caulk will work.

John Lucas

>It's a paint to glue up something on anything but a horizontal surface but if you can figure out a way to clamp it until the stuff dries it will definitely hold. I glue 4" mirrors to the wood bodies for many years now with no failures. I started using it because they glued the signs over the businesses at the mall where I worked using that stuff. when the businesses moved they had to chisel the stuff off. It stays flexible which allows the wood to move.