Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Used Jointer - need advice

Posts

Used Jointer - need advice

#1

Used Jointer - need advice

Al

>Howdy folks. Need some guidance regarding jointers.

I've been into woodworking for about 10 years now, but using mostly hand tools. I need to increase my productivity so I am looking to get some machinery to help with stock prep.

I picked up a dewalt 735 planer a while back, but now I think I need to get a jointer.

Found a Ridgid model JP0610 for sale locally. (It's the grey model, made by emerson, NOT the orange one)

The guy is asking $275 for it and it comes with 3 sets of blades, and a mobile base.

I'm thinking it's worth more in the range of $200-$225.

Here's the questions -

What problems should I look for with this model? I know to check the tables for warp, alignment and twist - anything else?

Are there any known problems with models this old? I think that the new orange model came out in 2003, although the seller said that his is only 5 years old - I'm guessing that it was left over since our HD's don't move many of these things.

Finally, what's a fair price? Am I in the ballpark or should I offer higher or lower?

Thanks for the advice.

Re: Used Jointer - need advice

#2

Re: Used Jointer - need advice

mike from american sycamore

>that seems to be a fair price but I hate to haggle so offer what you feel is comfortable for you. I would like to see the machine under power and joint a board both edge and face to check things out. Take a board with you.

Just listen to the machine, I can not imagine anything being wrong with this jointer. If you have a "Starett" quality straight edge you can check the tables. However there is nothing more to insure that this is a good machine that to just run some stock. With all the extras this is a good deal and will really help you on becoming a more effective woodworker. good luck

Mike

Re: Used Jointer - need advice

#3

Re: Used Jointer - Too Much for Used!

Dave Anderson (PacNW)

>$275 for a used machine that sold new for $325? I think you are right about it being worth $200. I have the orange JP610 and it is 7 years old. I am happy with mine, but I would buy a a new one before I would spend that much for used. A new one is $325 with a full warranty and a Lifetime service agreement. Just be sure to follow the directions to the letter for registering the Jointer . I had them replace the motor after it would not start, No charge after 6 years.

Just 2 cents worth,

Dave Anderson (PacNW)

Re: Used Jointer - need advice

#4

Re: Used Jointer - need advice

del schisler

>I have the orange ridgid jointer out of the box worked perfect Does the gray one have both infed and out feed tables move?? i know the infed would But the outfed if it moves I don't thank you can go wrong at which price you go for I would here is the link to hd jointer I would print this out and show him With a new one you get a lifetime warenty i belive they still have that Haggle a little You are getting a old machine for about 1/2 price ?? no warrenty Most important if the outfeed table doesn't adjust I wouldn't buy it my 2cent's

http://www.google.com/search?hl=en&source=hp&ie=ISO-8859-1&q=ridgid+jointer

Re: Used Jointer - need advice

#5

Dale Lenz

Re: Used Jointer - need advice *LINK*

Dale Lenz

>Check out the link below to ebay's completed sales, one sold "cheap".


Rigid jointer

Re: Used Jointer - need advice

#6

Re: Used Jointer - need advice

mike from american sycamore

>I looked up the extras... two sets of knives are worth about $45.00 and the mobile base list at $89.00 SO $275.00 less the extras brings the price down for the jointer to less that $150.00. Still not a bad deal fair for everyone good luck!

Re: Used Jointer - need advice

#7

Re: Used Jointer - need advice

Al

>Thanks for the input guys. i especially like the idea of picking a couple of comps from ebay to take along with me.

This thing was sitting on craigs list for over a month without any hits so maybe I'l get the deal of a lifetime.

\

I was looking at the new ones around here and they go for 429 now and the mobile base is included in that price.

I'm going to shoot for half that since it;s about 5 -7 years old.

Most cars lose about half their value in that time.

Thanks again for the input guys.

Al