Recent work
Posts
Re: Recent work
#2
Nice work, Andi
Ellis Walentine
>I can't imagine the process of creating these wonderful pieces, Andi. Is it something you can teach?
Awesome work.
Ellis
Re: Recent work
#3Re: Nice work, Andi
AndiWolfe
>Thanks, Ellis.
I show progress pics of one of the spheres I made during my demonstration on carving techniques. So, yes, I guess I do show how these are made. It's not for the faint-hearted ;-) Once the depth goes more than an inch into the sphere, it becomes very challenging. One catch of the bur can lead to a smash-up of the delicate wings.
Re: Recent work
#4
Deep carving
Ellis Walentine
>I can imagine the process, but there are so many unknowns. How do you hold the work? Do you use a Foredom tool? Whose burrs do you use? Do you carve the whole piece to a certain depth and then go deeper from there? Or do you carve one side of the piece to final depth and then rotate to the other side?
You don't need to attempt to answer here, but these are the questions that come to mind for folks like myself who would like to emulate your work in some small way.
Ellis
Re: Recent work
#5Re: Recent work
Philip Duffy
>Fantastic piece, and worthy of an article in the Journal! BZ, Andi. Philip
Re: Recent work
#6Outline of methods
AndiWolfe
>Thanks for the comments.
A little information about my methods:
1) Turn a sphere
2) Layout a grid using the indexing on my lathe combined with lines drawn while the sphere is turning
3) Decide on the pattern; draw the curves onto the sphere
4) drill some depth holes
5) rough out the spaces between each wing
6) careful carving down to my depth guides
7) go beyond the depth holes to leave about an inch of material in the center
8) finish carving
9) sandblast to reveal the grain
Ellis, I hold the work in my hands while carving. I made a carving bench that is particularly suited to my carving methods. If you ever have a chance to catch one of my demos you'll see pictures of my shop, carving bench, and methods of making my carved pieces.





