Pinner??
Thomas Norton
>HAve some projects coming up where a pinner would be a great addition. Any thoughts on brands and capacities?
Knowledge You Can Build On — Est. 1998
Pinner??
Thomas Norton
>HAve some projects coming up where a pinner would be a great addition. Any thoughts on brands and capacities?
Re: Pinner??
Fred Davis
>Thomas ,
I bought a Senco pinner back when they first came out , pins were made in Italy at that time.
Has a max. one inch pin and on down to 1/2".
This works for all I would need a piiner for, anything beyond that ,I step up a Brad driver , also Senco.
I have often thought that woodworkers tried to make a brad driver do the job of a larger finish nailer and then the tool makers responded by making the lengths of fastners increase to the point where your really walking on ice trying to make one tool do the job of two or three and not very good either.
Nails, staples, screws, all come in different sizes for very good reasons and trying to make one do the job of all three never works well.
FredD
FredD
See Carol Reed's 12 November Thread-23 Ga Pinners
George@Colonel's Workshop-Havertown PA
>
Re: Pinner??
McKay
>I use a Grex 23 ga. headless pinner. It is really nice. It will shoot from 3/8" to 2". I have used a Fastco, Senco, Duo Fast and Hitachi. All are 18ga. The 23 is great. I do not have any problems switching sizes with any of the guns. I used it today in oak and walnut with no penetration problems.