Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

It's a Poor Workman Who Blames ...

Posts

It's a Poor Workman Who Blames ...

#1

Lee Gordon

It's a Poor Workman Who Blames ...

Lee Gordon

>... his tools, but come on, how does one expect to clean up the leaves with a rake like this? It's like trying to do it with a fork.

Photobucket

On the other hand, it is a poor workman who doesn't notice he has worn the curved part at the ends of the tines completely off (and has probably been using the rake this way for a couple of years).

Re: It's a Poor Workman Who Blames ...

#2

A.J. Hamler

Re: It's a Poor Workman Who Blames ...

A.J. Hamler

>Nice rake.

A.J.

Re: It's a Poor Workman Who Blames ...

#3

Re: It's a Poor Workman Who Blames ...

Fred Davis

>From a Packrat's perspective (read my wife), it has a lot of use left.

FredD

Re: It's a Poor Workman Who Blames ...

#4

Perfect rake...

Kneale Brownson..Back enjoying CO snow

>for grubbing around the bushes.

Re: It's a Poor Workman Who Blames ...

#5

Dad . . .

steve mackay

>My Dad, till just this year, thought leaf blowers were the work of the Devil. If you really wanted to see a gentle, kind man loose his mind, fire one up on saturday morning. Mom sent me a pic of him joyfuly herding leaves with his new toy last week. Old Dogs, yadda, yadda, yadda.

Re: It's a Poor Workman Who Blames ...

#6

Hey, that's my loaner rake. Give it back!

Dave Bair, Eaton Rapids, MI

>

Re: It's a Poor Workman Who Blames ...

#7

Re: It's a Poor Workman Who Blames ...

Bill White

>Looks like it is time to plant a vine on the rake.

Or:

Plant a vine

upon the tine, and in time,

you'll have a fine grapevine

from which you'll make the wine.

Bill (poet laureate of Saltillo, Mississippi)

Re: It's a Poor Workman Who Blames ...

#8

Lee Gordon

Re: It's a Poor Workman Who Blames ...

Lee Gordon

>True. Perhaps I could make some barbecue skewers out of the tines. And I could slice the handle up into dozens of checkers.

Re: It's a Poor Workman Who Blames ...

#9

Rakin' up is hard to do...

Tom Dunlap

>You know the tune :)

As an arborist I've spent many hours raking many acres of lawns over my career.

My favorite has been the plastic tined rakes, generally Ames in the 26" width. When the tines wear down too far for use in grass they become 'street rakes' and do a quicker and easier job of cleaning up the chips, twigs and bits left in the street. Then, when the tines are completely worn off the rake follows its course in life and gets shot through the chipper. The honors of chipping tools gets passed around on the crew and is always met with smiles and high fives.

At one company I talked with the crews about metal or plastic rakes. This debate will go on forever. One of the crew leaders took on a research project for me. He carried metal and plastic rakes on his truck. My request to him was to use each on a variety of surfaces from turf, weeds, all sorts of mulch and the street. Measure the area and keep a record of how long it took to rake. To make sure there was no bias in the work I asked him not to do the division to determine square feet per minute with each rake.

At the end, with about 25,000 square feet raked, we found that plastic rakes were 40% faster. when I presented that to my boss he was extremely skeptical. So...I said...what if plastic is 'only' 20% faster??? What an effeciency increase! His response...since I didn't discuss the 'research' with him and the other managers I was subversive and I got my knuckles cracked. Huh??? Reprimanded for showing initiative?

Tom the Tree Guy

Re: It's a Poor Workman Who Blames ...

#10

Re: Dad . . .

davhamm

>Leaf blowers are the work of the devil. Never understood them.

Just this fall a neighbor had been out for at least 15 min blowing his leafs, my wife and I go for a 40 min walk or so come home he is still blowing. We (well actually my wife - I watched football) did our equivalent sized lawn in about 20 min with a rake.

Then again in my neighborhood these are the same folks who spend 5 min getting the snow blower going, 15 min blowing snow while we shovel ours in about 10 - 15 and they still have a thin layer of snow cause those blowers dont get all the way to the ground.

Now they do use there riding lawn mowers to get that job done in about 10 min when it takes us about 40 with the walk behind mower. and since thats done once a week in the summer they probably recover their time from that.

Gee I wonder why they all are overweight and comment at get togethers about how my wife can eat all that and stay so thin?

Re: It's a Poor Workman Who Blames ...

#11

Re: Rakin' up is hard to do...

davhamm

>Wow Tom, interesting findings any thoughts as to why plastic was faster?

Re: It's a Poor Workman Who Blames ...

#12

Re: Dad . . .

Barry Irby

>My now Ex Wife started talking about joining a gym or taking up walking or running. I asked her if it would bother her if there were a lawn mower in front of her? Wonder if that is what caused the divorce? Now she pays someone to mow the grass but has bought a very expensive bike and rides it for exercise. I have trouble with exercise for exercise sake.

Re: It's a Poor Workman Who Blames ...

#13

Re: Rakin' up is hard to do...

Tom Dunlap

>The plastic rakes don't wear out and loose their springiness. The tines wear down but they still do their job.

Metal tined rakes get bent and can't get their 'tune' back by rebending them either.

Durability could be factored in. If the operator is a clod or uses the plastic rakes roughly they will break. But!!! I made rakes last a long time even using them in Minneapolis winters with temps below zero. The operator just needs to make adjustments.

Even so, by picking up 20-40% efficiency new rakes could be bought and still be ahead of the money.

Re: It's a Poor Workman Who Blames ...

#14

Incidental exercise...

Tom Dunlap

>...is what I've heard this called.

When you park the car are you a 'close to the door' or 'first available' parker? Stairs or elevator/escalator?

One of the unpaid perks of being an arborist is that I get paid to exercise. Some people go to the gym to pump iron, I go to work and get PAID to pump wood!

At 55 I get comments about what good shape I am in. Part of getting as much incidental exercise as possible.

Tom the Tree Guy