Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Walking stick wood?

Posts

Walking stick wood?

#1

JL

Walking stick wood?

JL

>I typically make my chair legs out of maple, though I do use oak or cherry on occasion. I've made table legs out of quite a few woods.

A man asked me to turn a walking/hiking stick for his wife. I figure I would make it in two (or more) segments and connect it with brass or stainless steel couplers. That got me to thinking - what would be a suitable wood for a walking stick? I have a number of pieces of 8/4 on hand. Ash, red oak, cherry, maple, Brazilian cherry and even mahogany. I'm figuring the finished diameter would be on the order of 1 to 1 1/8" - maybe 1 1/4" towards the top.

I am obviously concerned with strength and resistance to breaking.

What would ya'll think would be a suitable wood out of the ones mentioned? Any other woods?

Re: Walking stick wood?

#2

Re: Walking stick wood?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Jl,

I've made two canes for myself, and a couple for friends. I've used tiger maple for each, but wouldn't hesitate to use any of those species you mentioned.

None of mine break down into sections. I figured a solid turned stick would be stronger than a jointed one of brass. I used Lee Valley kits for hardware, and a Steady Rest equipped lathe I used under 2 inch square stock.

I need my cane for both support and stability. Strength is a major concern. I weigh nearly 200 pounds, and have no problems with support. A walking stick may permit a lighter and slimmer configuration, and use of metal joined segments.

George

Re: Walking stick wood?

#3

Re: Walking stick wood?

Barry Irby

>I made several canes out of walnut. Used a cane kit from Lee Valley I think. Had the screw together fitting of the middle. Worked well, but you have to be extremely careful fitting the coupling or you will end up with an elbow crook in the middle.

I would suggest the lighter of the woods. Perhaps the Ash. I think the Brazilian Cherry would be uncomfortably heavy.

Re: Walking stick wood?

#4

Re: Walking stick wood?

John Veerkamp, Western Mo

>JL,

I've made walking sticks out of Osage Orange, walnut, pine(discarded Christmas tree) elm, cherry, ash and oak. I prefer to use a draw knife to make my sticks, keeping the natural turns and twists. I have one on our porch for me and each of my 6 g'kids. My favorite is OO bound with wire on the base to prevent spliting. Weight is not a real issue within reason. A properly balanced walking stick is swung in rythmn not carried.

John

Re: Walking stick wood?

#5

Re: Walking stick wood?

Ronald

>I have made them out of Sycamore. I like the crooked limbs. I have made several of them and they have held up real well. I mean 10 to 12 years. I went to the woods and picked my own. I am not a carver,but i try to carve a face or something into the top. Good luck in whatever you choose.

Re: Walking stick wood?

#6

Re: Walking stick wood?

mdclor

>I would think that hickory would be a great choice since it is very strong and straight grained; think shovel handles, etc.

FWIW,

Merle

Re: Walking stick wood?

#7

How the heck?

Lewis Dodd

>How do you do it without sections? I have a 24x36 Oneway and it would be tough to get anything longer than about 34 inches long turned!!

Lewis

Re: Walking stick wood?

#8

Clint Searl

Re: Walking stick wood?

Clint Searl

>American hornbeam or beech both make great canes or hiking staffs, as the bark doesn't have to be stripped. Stripped dogwood also makes a handsome cane. All are durable and strong in small diameters.

Clint

Re: Walking stick wood?

#9

Ellis Walentine

Re: Walking stick wood?

Ellis Walentine

>As George said, any of those woods would be fine. The design considerations I'd be thinking about are toughness, durability, appearance and weight. Hickory, osage orange and hornbeam are very tough, and osage is durable (doesn't rot readily). We use select hickory for jo sticks (Japanese fighting sticks) because when it breaks, it doesn't snap off but rather splinters.

Whatever wood you use, be sure to use straight grained wood. Riven is probably best. You don't want any slanted or short grain in a walking stick.

Ellis

Re: Walking stick wood?

#10

Re: Walking stick wood?

Bruce, a MN Galoot

>Mine have been made of oak, ash, cedar, poplar/walnut, and diamond willow. The diamond willow is the hardest to make because of all the carving. I used to help Scouts who went backpacking with me a walking stick. It was a great opportunity to work with the kids and for them to have something they made.

Don't bother turning -- drawknives and spokeshaves work wonders. The cedar and poplar/walnut ones are smaller diameter but wrapped in clear fiberglass and are unbelievably strong.

The tips are crutch tips set in epoxy. They never come off and work well on slippery surfaces. For the knobs, I turned ones from cherry and walnut, with a captured T-nut in the middle and a 1/4" bolt set in the top end. Unscrew the knob and it becomes a steady rest for a camera.

Bruce

Re: Walking stick wood?

#11

forgot to mention

Bruce, a MN Galoot

>that for the grip at the top, I use a foam padded grip like one found on exercise equipment at the gym. Plus a nylon strap that goes around the hand. The strip is held in place by the bolt and knob at the top.

Re: Walking stick wood?

#14

JL

I'd have to find some.

JL

>