Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Air brushing

Posts

Air brushing

#1

Air brushing

Joe Pack

>I plan to do a bit of turning and flat work where I would like to do a bit of painting, but want to avoid brush marks. Air brushing seems to be the thing to do, particularly where I want to gradually shade colors.

If I do this, I need to buy an airbrush setup, including small compressor. I have seen several ranging from the Harbor Freight set to setups costing several hundred dollars. I am not going to do hours and hours of this, but I also don't want to waste my money on something that is gross overkill for what I will use it for; I don't want to regret buying "cheap" and finding out I need something more, and I don't want to buy a Cadillac when a Chevrolet will do just fine.

I would like to be able to end up with both flat and gloss finishes, depending on the object. And I might even want to spray a bit of water-based poly or such if that can be done with an airbrush.

Any advice to offer on compressors, airbrushes, needles, etc.?

Re: Air brushing

#2

Clint Searl

Re: Air brushing

Clint Searl

>Even high end air brushes are finicky. They are fussy about what they'll spray, and tend to clog easily. For fine work, I use a little conventional gravity feed SATA detail gun with nothing but solvent lacquer. It's easy to adjust the pattern and pressure for control.

Clint

Re: Air brushing

#3

Badger or Paasc at Michael's

Mark Goodall - ATL - tooljunkie

>We picked up one at Michael's for half price right after the holiday a few years back.

They also sell compressed air in an aersole can, which works well for small tasks. At one point I just got a 8 gallon portable/auxiliary air tank, filled it with air from my large compressor in the garage and brought it to the art room when my wife paints.

Happy Woodworking!

Re: Air brushing

#4

Re: Air brushing

Bill Earl

>I have a few Badger air brushes. The Omni is probably the most versatile of the bunch. I've sprayed everything from inks to acrylics with it.

Mostly I run it off my 2 Hp compressor with an extra reguator and filter. It will go quite a while off a small pressure tank. I know some who power them with a spare tire.

DixieArt has a good selection and prices (www.dixieart.com)

Re: Air brushing

#5

Re: Air brushing

Fred Davis

>In the years long gone now that I did serious Leather work , I used a Paasch and Binks air brush brands.

The Paasch cost moe , but was well wprth it.

They routinely handle leather dyes which are like ink, right up Lacquer.

20 to 30 PSI is all the pressure they need.

For fading a color from light to dark in small areas, it is the tool of choice.

FredD