Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Need miniature drawer slides.

Posts

Need miniature drawer slides.

#1

Need miniature drawer slides.

Virgil Johnson

>I want to build a wooden machinist chest along the lines of an old Union brand box from the 50's. If you have used a wooden machinist chest then you know how the drawers can only be extended around 2/3 of the way as they have wooden drawer guides. Pull them too far and you will dump the contents as they have no drawer stops either. I'm not going to build one with the same undesirable features. I'm too used to the full extension drawers on my Kennedy boxes. So my question is where can I buy miniature drawer slides? I've googled and found Rockler brand. I would like to find a brand that someone here has actually used.

Re: Need miniature drawer slides.

#2

Re: Need miniature drawer slides. *LINK*

Dick Coers

>Fine Woodworking #143 had an article on making wood full extension slides if you were so inclined. I think Rockler has gone to import slides. Used to be all Accuride.


FWW article PDF link

Re: Need miniature drawer slides.

#3

Perfect.

Virgil Johnson

>This would be ideal. In looking at the design I think I can make the parts from 1/8 steel or alum. and not lose as much drawer width as I would if they were made from wood. Thanks Dick.

Re: Need miniature drawer slides.

#4

Re: Perfect.

Barry Irby

>Just a thought. I have full extension roller/slides on the drawers on my lathe cabinet. They have some sort of heavy grease in them. All seemed well until I actually started using them. Sawdust gets in them. I blow them out occasionally, but some of it gets stuck in the grease. They feel like forty miles of bad road now.

So, If your's are going to live in the shop try to come up with a design that won't capture sawdust.