Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Confession and need advice

Posts

Confession and need advice

#1

Confession and need advice

Terry Alexander

>I use my tenoning jig about once a year. I was going to use it yesterday and it is covered in a filmy layer of sawdust.....kind of "oily" as I do protect my tools...but didn't do a very good job.

No rust.....I just need to give this a "bath".

Do you think it would be ok to set this in a deep pan filled with paint thinner and then take a PM brush (or stiff paint brush) and give it a bath?

Other suggestions would be appreciated.

AND....I will probably build a box for the jig to "sleep" in while not in use.

As always....TIA

Terry Alexander in West Texas

Re: Confession and need advice

#2

Re: Confession and need advice

Grant Wilkinson

>Terry: If your jig is anything like mine, there should be no problem soaking it. I use varsol or mineral spirits to degrease all the time, and they haven't hurt anything yet.