Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

installing blue urathane bandsaw tires...

Posts

installing blue urathane bandsaw tires...

#1

installing blue urathane bandsaw tires...

Victor Parisian

>I'm following the directions. This thing appears to be too short for the wheel. I've heated it in warm soapy water for 5 minutes and it doesn't appear to be any more flexible or stretchy than when I took it out of the package.

I'm stopping to reheat the water and get more soap on it. Should I be using clamps to keep it in place as I work it on around the wheel?

Any help?

Victor - otherwise enjoying a day in the shop

Re: installing blue urathane bandsaw tires...

#2

Re: installing blue urathane bandsaw tires...

Howard Acheson

>Putting on new urethane tires is a struggle. Heat them thoroughly in boiling water. Use clamps to hold them on while you use a couple of large, round shafted screw drivers. Move or add clamps as you go around. After you get it on, insert a dowel and sort of roll the dowel around the wheel perimeter. Go around 3 or 4 times. This evens out the pressure on the tire.