Adventure in buying local Band Saw Blade
Barry Irby
>Back on Nov. 2 I posted about my on going love/hate relationship with my 14" Delta bandsaw with a riser. William Falberg and others suggested new blades and based on that I found a local purveyor of blades and ordered a couple of 2 TPI blades to try. Had to call several times to be sure they had the 2 TPI stock to make up the blades out of. Waited several days for the blades because Randy or Bobby or whoever it was that welded them "didn't come in today". Drove about 30 minutes to get them. They were 3TPI. When I said "I ordered 2 TPI" the answer was we didn't have any and don't know where we would get any. These look like decent blades and similar to what I was using. I asked who made them and they said it was either "Lenox or whoever it is that makes the other brand, they are all the same."
Somehow, I thought this was going to better and easier than ordering them and waiting for the mail. Maybe not.
They did say the would sharpen them for $3 each. I have sharpened blades myself, but they never come out as well and if they were new. I wonder if they can do a better job? Maybe, maybe not.



