Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

repairing rough cedar knotholes

Posts

repairing rough cedar knotholes

#1

repairing rough cedar knotholes

michael romeo

>I have holes in my rough cedar wood, from knotholes coming out and woodpeckers eating at some of my wood. My home has the 6 inch wide tough and groove rough /out cedar. The wood is naturally treated with cwf product. Wood patches even one quarter inch thick are too noticable. Pieces of roof shingles brad nailed over them look the best. I was wondering if anyone makes a rolled rough cedar veneer product, like they do oak. It would be perfect to cut pieces of it and glue over the defects, with a few small brads. It would also take stain.

Re: repairing rough cedar knotholes

#2

Ellis Walentine

I don't know of anything like you're looking for

Ellis Walentine

>I'm thinking, though, that if you have a lot of these repairs to make, you might do well with some kind of exterior wood putty -- maybe some Durham Rock Hard, colored to match the look of your siding.

Ellis Walentine, Host

Re: repairing rough cedar knotholes

#3

Hmmm

Robert R. Clough - Thorncraft

>Could you carefully drill the holes out, get a piece of siding and equally carefully holesaw exact size inserts? If so, I'd use a good waterproof adhesive, probably epoxy. I haven't worked this out, but it's a thought.

Re: repairing rough cedar knotholes

#4

Re: Hmmm

Gerry In North Surrey

>How about that Dutchman thing that Norm does?

Gerry