Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Non marring dead blow hammer?

Posts

Non marring dead blow hammer?

#1

JL

Non marring dead blow hammer?

JL

>I've seen some dead blow hammers (mallets or whatever) that weren't black and didn't leave black marks on your pieces. Does anyone have a source? I looked at my usual suspects (Lee Valley, Rockler, Woodcraft) and didn't find any.

TIA

Re: Non marring dead blow hammer?

#2

Re: Non marring dead blow hammer?

John Lucas

>JL I don't remember where I got mine but it's orange and doesn't leave a mark.

Re: Non marring dead blow hammer?

#3

Re: Non marring dead blow hammer?

John E in SC

>Mine's orange also. I think I might have bought it at Harbor Freight, but not postive. Works well though.

Re: Non marring dead blow hammer?

#4

Re: Non marring dead blow hammer? *LINK*

Kneale Brownson..Back enjoying CO snow

>Tool Warehouse has several pages of deadblows.


TW Deadblows

Re: Non marring dead blow hammer?

#5

Re: Non marring dead blow hammer?

Pete in Holland, MI

>Mine's orange & Harbor Freight was the source.

Re: Non marring dead blow hammer?

#6

Eastwing

Jim Dillon

>JL,

I have small and large Eastwing dead blow hammers that are very handy. Don't know how mar-free they are compared to others, but I can't complain. IIRC, I got mine at the Borg, but I see Amazon carries them - at least through third-party vendors.

Jim

Re: Non marring dead blow hammer?

#7

JL

I believe I want the orange ones. I've seen ones.

JL

>with a brass collet or something on the end.

Re: Non marring dead blow hammer?

#8

Re: I believe I want the orange ones. I've seen on

Fred Davis

>Mine is Orange, has Stanley stamped on the head, does't leave marks either.

FredD

Re: Non marring dead blow hammer?

#9

Re: I believe I want the orange ones. I've seen on

Stuart Hough

>I got mine from Sears. It has the black body with red non-marring covers on the ends (bonded into the body). This has served me well, and cost about $26 three years ago.

Re: Non marring dead blow hammer?

#10

Re: Non marring dead blow hammer?------WebKitFormB

woodenleg------WebKitFormBoundaryxyUDg8YhffKx+T3p

>Go to any good auto parts store, harbor frt or tool dealer. Dave

------WebKitFormBoundaryxyUDg8YhffKx+T3p

Re: Non marring dead blow hammer?

#11

Re: Non marring dead blow hammer?

john lucas

>Woodworkers supply has the orange Deadblow hammers from 1 lb to 4 lb. Part # 142-973 gets the 2lb version.

Re: Non marring dead blow hammer?

#12

Re: Non marring dead blow hammer?

Carol Reed - home in Strawberry

>HF has the orange ones too.

Re: Non marring dead blow hammer?

#13

JL

Thanks. I'll probably go with Amazon..

JL

>They carry some reasonable ones (Grizzly) that look pretty decent.

Re: Non marring dead blow hammer?

#14

Rick L

Re: Used to buy the expensive ones... *LINK*

Rick L

>but since I've tried these from Harbor Freight...

They seem to work just as well for a graction of the cost in our shop. Was paying $50 for the 4 lb ones...


Dead blow orange

Re: Non marring dead blow hammer?

#15

Re: Used to buy the expensive ones...

steve mackay

>Stop in their "abrasives" section and check out how many sanding belts you can get for ten bucks. AND they last as long as the expensive ones !

Re: Non marring dead blow hammer?

#16

At The Price, Rick

George@Colonel's Workshop-Havertown PA

>They are hard to beat.

George

Re: Non marring dead blow hammer?

#17

Rick L

Re: Sandpaper is different...

Rick L

>I do purchasing for a commercial shop and if they don't like something you find out real fast. HF has some good things and the deadblows seem to be one of them.