Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>9 Nov 2009

Good Morning,

The weather here has been GREAT and I've been able to get firewood split, stacked, yard work done, and get the shop cleaned up enough to where I have room to move around in it now.

Took the LOML out for a nice Sunday afternoon motorcycle ride in the country to admire the fall colors, warm temps, and just putzing around the various country sides and enjoying each others company on a ride we don't get to do very often.

Worked at the day job and it seems like our parking lots at work keep getting more and more "empty". Really makes one nervous to know how it's been in the past 10 years and to see how it is now is unnerving.!! If your local school has an International School Bus? Chances are that it was made right here in Conway, AR. They have announced just this past week that they will be closing down much of the plant and laying off about 475 people and keeping the rest of the plant to produce the buses in Tulsa, OK. December 31 will be the last day for the bus plant here.

Well, that's it for me. More stuff to do in the yard and in the shop this week. I've taken some time off work before I loose my vacation time, so this week will be spent getting everything done that I've been needing to get done for a very long time.

So what did YOU do this past weekend??

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

JL

Re: WC Weekend Accomplishments....

JL

>Sorted through 1700+ board feet of lumber. Dave and Mike took their share and paid me for the transportation and the lumber. I took two pick-up truck loads back to my house from the staging/sorting area.

So now I have 1200+ board feet left (and a very full garage).

Re: WC Weekend Accomplishments....

#3

Power Carving

Thomas Skaggs, Foothills of Mount Level

>We had some remarkably warm weather here in the Foothills for November. I decided to take advantage and do some messy work outside of the shop. I carved a large Dogwood leaf out of a block of cherry. The leaf will be a seat. I used a new tool (to me) a Kutzall carving disc that is made for a 4 1/2 grinder. I have to say....I was impressed. I have never used those chainsaw carving discs but I hear they are quite dangerous. The Kutzall is not grabby at all...worked great! I hogged out the form and will finish it with hand carving. Glad I worked outside....sawdust everywhere!

Tom

Re: WC Weekend Accomplishments....

#4

Clint Searl

Re: Power Carving

Clint Searl

>I have used the Lancelot chainsaw disk on several projects. It's easy to control with a bit of practice, and can waste a lot of wood fast. It was the primary tool on this 16 x 10 x 3 bowl.

Clint


img

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

John Veerkamp, Western Mo

>Started making boards for a long promised craftsman style book case for LOML. the wood is local walnut cut about 12 yrs ago. I've had it stacked in my shop since then. Most of it was used along with cherry cut at the same time for new kitchen cabinets a few years ago. I'll still have about 100 bf walnut left from that find.

Been awhile since I did any flat work.

John

Re: WC Weekend Accomplishments....

#6

Re: Power Carving

John Lucas

>I agree with Clint. I use the chainsaw cutter a lot and I know it seemed grabby at first but you learn to use a scraping sort of motion and it's very controllable. That being said I've use a couple of the burr type grinding wheels and they are more controllable and safer. they will still run on you if you screw up. The chainsaw wheels will go into tighter places but that's where they try to grab so I change the location of the guard so it acts as a bevel and rides on the wood letting me control the cut.

Re: WC Weekend Accomplishments....

#7

Re: WC Weekend Accomplishments....

John Lucas

>I had one of those weekends where you have 5 things going at once. I was rebuilding an old strip sander. I started by removing the rusted table. Then I put some finish on several bowls, put them up to dry, then applied Naval Jelly to the table top and put it aside. I turned an angel christmas ornament. Then washed the Naval Jelly off and polished the table top a little.

Then I cut up some blanks for some mirrors out of wood that was beautiful but had defects. I turned a little and then patched the defects with epoxy. While that was drying removed a few more parts from the sander and cleaned, lubed, and adjusted them.

Then I ate lunch and went for 20 mile bike ride. Came back and put more finish on the bowls, worked on the mirrors some more and turned another angel.

It went like that all day saturday into he evening and most of Sunday with another good bike ride on Sunday.

Oh did I mention that I cleaned the shower, washed clothes and then spent sunday evening watching TV while ironing my clothes.

I guess I'll have to just die to slow down because obviously I can't sit still very long.

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

George@Colonel's Workshop-Havertown PA

>Happy Monday Dennis,

I pulled the throttles back to "flight idle" this weekend. The cgherry and sycamore chest of drawers for our guest bedroom suite looks very good. I put the final finish coat of tung oil on it on Friday night. Its sitting waiting for the finish to cure so I can attack the gloss with steel wool and paste wax. the new Kraft Made Kitchen cabinets arrived on my back porch on Saturday afternoon, and #3 son Ken stapled plastic sheeting over the screened portion of the porch to keep out weather while he and his partner demolish the kitchen and install a new one. We managed to sell out gas range on Craig's List. Nice party on Sunday night. We hosted an Ecuadorian couple who sponsered our #2 son Ed on the International Rotary Club Exchange program, some 12 years ago. Nice to thank them in person. We had a memorable time. Several of my kids are fluent in Spanish, so communicating was easy. Tomorrow the chest gets hauled up to the 2nd floor and a new project begins. Have a great week, Dennis.

George

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments....

Dan Donaldson

>Did a bit of cleaning and got parts of the pin blocks for the dulcimer that I am building glued up. Sunday afternoon, Lori and I went for about a 100 mile ride on the bike. Sure has been nice for the last few days. Trying to get all of th riding in that we can before it gets too cold.