Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

woodcraft ez squeeze hose clamps

Posts

woodcraft ez squeeze hose clamps

#1

woodcraft ez squeeze hose clamps

Kurt Rosecrans

>All of my stationary tools use the same hose from my dust collector. When I use a tool, I must move the hose from one tool to another (I would like to have a more permanent system of pipes, but that is a future project). I would like a quick clamping system which would accomodate my "traveling" hose. In a recent flyer from Woodcraft, there are "EZ Squeeze Hose Clamps." The 4" Double Loop clamp looks ideal for what I need. Does anyone have any experience with these?

Re: woodcraft ez squeeze hose clamps

#2

Re: woodcraft ez squeeze hose clamps

Barry Irby

>Not sure what you are doing. I have most of my shop piped, but I still have a planer and Performax that share a hose. I bought couplings/adapters at Woodcraft and put them on the machines. There is a hose end that is permanently attached to the hose. The fittings are male/and female and just slip together. No clamping. Just move the hose to the next machine. Actually, on the Performax the hose fits over the coupling. On the planer, I made my own out of the bell end on 4" S&D Pipe and the hose coupling fits inside it. Both work fine.

Re: woodcraft ez squeeze hose clamps

#3

Jim DeLaney, Austintown, Ohio

Re: woodcraft ez squeeze hose clamps

Jim DeLaney, Austintown, Ohio

>I'm using them for the flex connections on all my tools. They work very well.

Re: woodcraft ez squeeze hose clamps

#4

Acrylic quick connects

Al Goldstein

>I have the same situation with a traveling dust collector that I have to connect to each machine. I use the 4" QuicKonnex System from Penn State Industries (#DCQCSET, #DCQCH, #DCQCM). They are acrylic and are easy to connect and disconnect and hold quite well. I recommend them highly.

Re: woodcraft ez squeeze hose clamps

#5

JL

Re: woodcraft ez squeeze hose clamps *LINK*

JL

>I don't have any experience with the hose clamps. What I use are this sort of quick connects.

I have lengths of 4" hose on some of my tools. They all end in these connectors. I have an ABS blast gate on the end of my drop. It fits right into the quick connect fitting by a friction fit. Between the closeness of the fitting and the vacuum, you can't pull them apart.

I use this for my cabinet saw, jointer and planer.


img

Quick Connect fitting

Re: woodcraft ez squeeze hose clamps

#6

Me too...

Tony - Memphis

>They seemto work pretty well for me. The ABS plastic is very "grippy." I did manae to crack the piece on the hose end (female?), but it hasn't affected the operation. I'm a "hoser"....I move the hose around from tool to tool. My shop is pretty small, so it isn't a big deal (except that you keep bumping your head on stuff when you bend over to plug/unplug.)

Tony