Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

lvl beams

Posts

lvl beams

#1

lvl beams

Fred Steiner

>Can I span a 20 feet with 1 lvl beam? Do I need to double the beam?

Re: lvl beams

#2

Yes, No, and Maybe

Barry Irby

>You have asked a How high is up question.

We would need to know a lot more before we could answer your question. What would the beam be supporting might be chief among the missing information.

Then, there is the question of what size the LVL would be. A huge LVL might span 20" if it is lightly loaded. I know they come in many widths. Not sure if they are all 1 3/4" thick or if they make some that are 3 1/2" thick.

Ask the seller. LVLs are engineered. You tell the seller what the conditions will be and they have a staff engineer tell you what will work. They will do that much for free.

Re: lvl beams

#3

In That Case . .

Mark Mandell - Gone Round In Jersey

>"Depends on what your smoking."

Re: lvl beams

#4

Span chart

Richard Jones

>To answer your question directly, unless it's a ridge beam, probably not.

If you provide some more info, we can probably narrow the choices down.

Here's what I use for plan review at work:

http://www.ilevel.com/literature/TJ-9000.pdf

Hope this helps.

Rich

Re: lvl beams

#5

Re: lvl beams

Lee Schierer - McKean, PA

>The LVL's for my shop were 18' long and there are three of them glued and bolted together, they came 20 feet long and were cut down to fit. As others have indicated you need to locate a dealer and talk directly. They will want to know the load, height restrictions and the construction of what the beam will be supporting. Once they have all the information, they will design a beam for you and tell you how it needs to be installed, including drilling instructions if it needs to be paired up.

Lee

Re: lvl beams

#6

Re: Span chart

Fred Steiner

>Thanks for the good advice. Contacting the lumber yard on Monday.fs