Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

working wenge

Posts

working wenge

#1

working wenge

mike from american sycamore

>I am considering building a dining table from wenge. Anyone work wenge before in a large project as a table. Looking to build a simple harvest table 38 x 104 in wenge. I know it is hard and sometimes brittle? Regular glue ok? Any warnings or special instructions?

thanks,

Mike

Re: working wenge

#2

Re: working wenge

Brent Smith in Montreal

>Hi Mike,

Regular yellow glue works fine. Watch for splinters, they can fester pretty quickly and become quite painful.

Re: working wenge

#3

Ellis Walentine

Brent got it

Ellis Walentine

>Wenge splinters are among the worst, and it's full of them. Reminds me of bones in shad. It glues very well, in my experience. Edges can definitely be brittle, so be careful until it's all glued up.

Ellis

Re: working wenge

#4

Bart Goldberg

Re: working wenge

Bart Goldberg

>I just finished a jewelry box the incorporated Wenge components. In addition to the splintering issues already mentioned, this is a very open pore wood. If your using it for a large table, I would encourage you to use a grain filler. This will also help to encapsulate the grain and avoid ongoing splintering issues. While you would probably want to use a commercially available grain filler, I used two part epoxy to which I added dark brown aniline dye. This worked quite well and blended in with the Wenge perfectly and allowed me to get a very smooth surface.

Happy Woodworking

Bart

P.S. be sure to post pictures of your work in progress as well as the complete project.

Re: working wenge

#5

Re: working wenge

mike from american sycamore

>thanks guys for great info!

Mike

Re: working wenge

#6

Re: working wenge

Dave Paine

>As others have commented, this wood splinters easily and can be painful.

I would not attempt to use this wood for an entire table top.

It looks terrific when used to accent inlays or to contrast other woods.

Good luck in your project. Take pictures of the splinters as well as the project.

I have "experienced" this on a personal level.