Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Delta 50-720 dust bag question

Posts

Delta 50-720 dust bag question

#1

Delta 50-720 dust bag question

Jerry Samsen

>Can anyone tell me what the diameter is of the upper 1 micron bag for the Delta 50-720 dust collector? Is it 14.5"?

Trying to figure out if I can use this bag to replace the 30 micron bags on the Delta AP-400 that I just bought off of ebay.

Grizzly has 3 micron bags that are 14.5" but would rather have the 1 micron if possible.

thanks.

Re: Delta 50-720 dust bag question

#2

Re: Delta 50-720 dust bag question

Chuck in ND

>I have a Delta 50-760, I might have an extra set of new bags, upper and lower that fit a AP400. They are supose to fit the 50-760 also. I'll have to check tomarrow ( Friday ), it's geting late here now. I'll try to let you know sometime tomarrow if someone else hasn't helped you by then.

Re: Delta 50-720 dust bag question

#3

Re: Delta 50-720 dust bag question

Chuck in ND

>I took a look this morning to see what the bags fit. On the package it says that they fit a Delta 50-775 which looks identical to the Delta Shopmaster AP400, both are 1 HP units. The opening on the Delta 50-760 that I have measures around 15 1/2", and I believe that this summer I checked the bag for fit and it looked good, so I put it back in the package and stored them away for future use. The item number for the set of bags is 50-367, and they are 5 micron.

Re: Delta 50-720 dust bag question

#4

Re: Delta 50-720 dust bag question

Jerry Samsen

>Chuck, thanks for your help.

Re: Delta 50-720 dust bag question

#5

Re: Delta 50-720 dust bag question

Chuck in ND

>Your welcome Jerry. Let us know how it all works out for you.