Re: Minwax Polycrylic - food safe?
Jim Dillon
>Stephen,
I would guess that most acrylic finishing polymers are "food-safe" once fully cured. The potential problem comes in when traces of unreacted monomer remain in the "fully-cured" polymer. While I have never heard of toxicity issues related to a fully cured polymer (of any type), residual monomer, or degradation products from the fully cured polymer* can be suspect. Said another way, the monomer(s) that goes into making a polymer can be quite toxic, but once the polymer is formed and allowed to FULLY cure, the liklihood of a problem from the polymer per se is small. Now, the addition of an additive package (driers, surfactants, accelerators etc.) to the monomer mix changes things and all bets are off. Personally, while I am generally cautious regarding chemical toxicity issues, I think you should be OK. Now, the durability of the finish is another matter, as Mark mentioned. This advice is worth what you have paid for it 8-).
* The degradation products of some polymers (degradable sutures/coatings, for example) can elicit a very mild inflammatory response (due to local low pH issues) that the body can tolerate very well.
Jim