Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Flatbed saga (for moving lumber)..

Posts

Flatbed saga (for moving lumber)..

#1

JL

Flatbed saga (for moving lumber)..

JL

>Finally found a flatbed rental truck at a reasonable rate. The local Penske rental place is ordering one in from his distributor. They will rent me a 24' Flatbed for $80/day + $0.10/mile. The auction company and business owner do not want the liability of loading in box trucks - probably the time factor also. They would have grudgingly allowed me to use a flatbed trailer - if it didn't have sides.

Probably for the best. All told, I (we actually - this is a three-way split) am getting ~1700 board feet of mixed hardwoods. By my rough calculation, that will be over 7000 lbs of wood.

Thanks to Bill Tindall for his lumber grading advice. I think that we're getting a reasonable deal. I will post pictures next week.

Re: Flatbed saga (for moving lumber)..

#2

Re: Flatbed saga (for moving lumber)..

ted Wong

>yeah that auction had some tempting piles of wood. I bad on a couple of lots at the last minute or so and was outbid each time. I thought their online auction system was a bit quirky. As the original deadline time approached the deadline time posted on the screen advanced by five minutes. And in that time I saw the bids sky rocket. Still the prices were reasonable but when I figured in the buyers premium, loading fees and the price of an LTL carrier to bring the merchandise up to Ohio the deal didn't look so great.

Re: Flatbed saga (for moving lumber)..

#3

Re: Flatbed saga (for moving lumber)..

Barry Irby

>Pine beetles got to a large pine in my yard and another had a spot that appeared to be starting to rot at the ground. Had them taken down and cut into about eight foot lengths. Moved them into the driveway thinking I would have them sawed into lumber as much for sentimental reasons as anything. Spent about a month trying to find someone to come saw them or a truck to haul them to a mill. Everyone with a flatbed truck said their insurance wouldn't cover them. I had no luck at all and finally paid somebody trimming trees a hundred bucks to haul them away. About a month later somebody told me his son had a mill and would have come and got them and sawed them for me. Its all in the timing.

Re: Flatbed saga (for moving lumber)..

#4

10 cents a mile?

Ed Mulligan, Caoe Cpd MA

>Wow that's a good deal. Or is it a typo? I pay around $1 per mile for a 15' box truck, plus gas and insurance.

Re: Flatbed saga (for moving lumber)..

#5

have a tarp available if needed

Bill Tindall, E.TN

>1700 bd ft may seem like a mountain of lumber but loading it by hand in anything would have been a short job.

Dividing a stack among participants can lead to stress or worse. If you are dividing a lot, prearrange how the division will be made. A suggestion is: by chance pick an order in which to make the division and then take from the stack a layer at a time(or board at a time if the stack is small). Picker #1 takes layer 1, etc. Prearranging the process will avoid problems.

Re: Flatbed saga (for moving lumber)..

#6

JL

Not a typo..

JL

>I also happen to know the guy :).

Re: Flatbed saga (for moving lumber)..

#7

JL

Thanks for the sorting idea.

JL

>Mike and I are splitting the poplar. Dave and I are splitting the ash. Mike and I are splitting the soft maple. Dave and I are splitting the hard maple. All of us are splitting the red oak. Of course the big problem is - what do I do with the rest of the 8/4 red oak?

Re: Flatbed saga (for moving lumber)..

#8

Nice to have friends :)

Ed Mulligan, Caoe Cpd MA

>

Re: Flatbed saga (for moving lumber)..

#9

Definitely the way to go...

John in NM

>I was always glad to have my flatbed when going to buy a couple units of framing lumber or sheathing for our house. The guys at the lumber yard can't load most trailers with a forklift, so the trailers always seemed to wait longer than trucks.

Re: Flatbed saga (for moving lumber)..

#10

Re: have a tarp available if needed

Brian in Brighton

>I split a big haul of Walnut some years ago with a group of guys. After having split smaller lots before and seeing the resultant anger, I would agree to do it a layer at a time. We did that with the walnut and then once the pile was divided the bartering began. One guy wanted a few pieces of wide stuff and traded another guy for it. It saved a lot of sour feelings.

We did it 1 board, 1 board, 1 board on each layer and it worked out good.

Don't expect everyone to be happy, someone will get a wider piece or a nice grain and someone else will be upset. Part of the price for a better load of wood.

Brian in Brighton