Lumber sizess-- When did this happen
davhamm
>Ok, I knew a 2x4 was 1.5 x 3.5
But since when did a 2x12 become 1.5 x 11 1/4 (or 11 1/8)
and a 2x10 become 1.5 x 9 ish
Knowledge You Can Build On — Est. 1998
Lumber sizess-- When did this happen
davhamm
>Ok, I knew a 2x4 was 1.5 x 3.5
But since when did a 2x12 become 1.5 x 11 1/4 (or 11 1/8)
and a 2x10 become 1.5 x 9 ish
Quite a while ago
Bill Houghton, Sebastopol, CA
>From whatever by 8 up, softwood can be up to 3/4" less than the nominal width and still be OK. This has been true for as long as I can (in adult life) remember.
What frosts me is that nominal 1" redwood and cedar are now as thin as 5/8". Makes it very very hard to match trim on our old house (where the nominal 1" boards are often 7/8" but always at least 3/4").
Re: Lumber sizess-- When did this happen
Barry Irby
>I got out of college in 1971 and went to work for a commercial contractor. I think the rules for lumber sizes changed about then. We were getting differnt batches of lumber form differnt suppiers and some were the "old" size and some new.