We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>My daughter saw a nifty craft idea that she would like to try, but it involves drilling a hole in a glass block (like the ones you see in bathroom walls or windows) and putting a small light inside.
What kind of drill, and what method do you use to drill a hole in a glass block?
>I don't think glass blocks are tempered glass, which can't be drilled (I tried it one, fortunately wearing safety glasses, and the dramatic disappearance of the vent window I was trying to drill and simultaneous appearance of hundreds of little bits of glass was really exciting). Check with your supplier first.
If they're not, I think (not sure) that you can drill glass with ceramic tile bits, available at most hardware stores/big box home improvement stores. There's also a method that involves a wood or metal rod spinning in a pool grit, like valve grinding compound, retained by modeling clay or something similar. This is slow, but, I imagine, less prone to chipout.
>I have done what bill said. It's slow but I used a chucked up a piece of copper tube in the drillpress on the slowest speed, then used some valve grind compound from NAPA and built a little dam around it with masking tape. I've also used bits from the big box store made for ceramics and stuffed a small piece of wet paper towel inside the bit to help lubricate it.
>It's time consuming, but I've never broken one yet! I use a 1/2" diamond bit made for drilling glass or tile from the blue box (it's triangle shaped). Seems like it might have been in the $20 range, but I'm not positive. I usually use my drill press just to help with the arm fatigue - I go slow, and use lots of water as a lubricant / cooling agent - if the glass gets too hot, it will crack.
What we do is feed a string of Christmas tree lights down in the block (have to cut off the recepticle end), then take wide ribbon and "wrap" the box like a Christmas present using hot glue. Looks very pretty when lit up, and makes and very nice gift.
>Do a google search for "glass block Christmas presents" or something similar, and you'll get lots of info. Look under google images for lots of pics, also. I checked this last night, and saw lots of variations. May have to make some more for Christmas again this year!