Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Hot finishes?

Posts

Hot finishes?

#1

JL

Hot finishes?

JL

>I have often used the mixture of BLO, Poly and mineral spirits (33% each) as a wipe-on finish.

I was talking with a fellow woodworker last week. His practice is to heat the mixture to 180-200 degrees F and then slather it on with a brush. He wipes it off after it starts to gel or get somewhat tacky.

I can see that the warm finish would probably penetrate into the wood quicker. I can understand that the solvents (mineral spirits) would go away quicker. I can even sort of rationalize that the BLO might oxidize quicker.

In ya'lls opinion - do the benefits outweigh the risks? We are talking about heating combustible materials.

Any thoughts on the matter?

Re: Hot finishes?

#2

Re: Hot finishes?

Glenn Madsen, near San Francisco------WebKitFormBo

>If I put a half pint jar of such a finish in a pan of water, almost boiling hot, no longer on the stove, it would come to temperature pretty quickly, no? And no sparking problem.

The only finish I've really wanted to thin out that way, though, was Tried & True, with the beeswax in it. Not a finish i use often, though. There's still most of the quart on the shelf.