Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

New Pine Floor

Posts

New Pine Floor

#1

New Pine Floor

Mark Mandell - Gone Round In Jersey

>Have a friend who is putting in a new (unfinished) pine floor, but wants to apply a stain (unknown color). He knows enough to anticipate a blotching issue and has asked how to prevent it. Normally, I'd tend to tell him either partially seal with thin shellac as a conditioner, or use dye stain in several applications, or put the color in the finish (and apply to avoid lap marks).

Who here been there done this with success and how?

TIA

Re: New Pine Floor

#2

Re: New Pine Floor

John Pappas

>Don't rule out not using stain at all and let it age to a beautiful pumpkin color.

Re: New Pine Floor

#3

Ruled Out

Mark Mandell - Gone Round In Jersey

>by SWMBO under the life-is-short-I-want-it-now school of decorating.

|;-}}

Re: New Pine Floor

#4

Re: New Pine Floor

Andy Halterman: Colores de oto�o

>You can go the conditioner route and get a nice even color. So even that it becomes boring to me. We typically screen pine to 120 or 150 if we are staining. It helps minimize blotching but you still get some of the character of the wood to show through. We also apply stain with a buffer and a white pad. It goes down faster that way with less chance of lap marks. Pine typically absorbs stain like a sponge. Gotta work quick and don't leave cross grain edges.

Andy Halterman

Nice 19 mile pedal through the woods yesterday in Hendersonville, NC�